Exhibit 2 - Quote QUOTE
Page 1 of 2 QUO‐05498‐W6D7‐3
To
Michael Tucker
Denton Fire Department ‐ Bomb Squad (TX)
332 E Hickory
Denton, TX 76201
QUOTE NO.: QUO‐05498‐W6D7‐3
EFFECTIVE FROM: 1/12/2023
EFFECTIVE TO: 4/12/2023
CURRENCY: US Dollar
Tel: 940‐206‐0520 SHIPPING METHOD: Ground
Fax: SHIPPING TERMS: FOB ORIGIN, PREPAY AND ADD
Mobile: 940‐349‐8107 *DELIVERY DATE: 32 ‐ 36 Weeks APO
Email: michael.tucker@cityofdenton.com PAYMENT TERMS: 1% 10 DAYS, NET 30
GSA Contract No.: GS‐07F‐0430V
QTY P/N DESCRIPTION $/UNIT LINE TOTAL
2.0 Mini‐123
Mini‐CALIBER® Robot (COFDM)
Comes standard with: • Rubber Tracks for traversing rough terrain and climbing stairs • Wirelessly
Controlled Front and Rear Flippers with positional feedback with preset Home and Stair Climbing
positions • Turreted Robotic Claw arm with 15lbs lift and 5 axes of movement • 10x Color zoom
camera on claw arm • Front and Rear Color/IR Drive Cameras • Wide Angle color rear mast camera
• Color Claw camera • 2‐Way Audio: Talk/Listen through the robot • LED drive lights for Front and
Mast Cameras • Wireless RF control: 1.3GHz Video; 900MHz Data • Portable, Lightweight, Handheld
Controller • 2x 24V DC Lithium‐Iron‐Phosphate Robot Battery Packs (1x onboard; 1x spare) & 1x 24V
DC Battery Charger • 2x 12V DC Lithium‐Ion CCU Battery Packs (1x onboard; 1x spare) & 1x 12V DC
Battery Charger • 2 year limited warranty • Electronic manual with training videos and hard copy of
operator manual. *Note: Mini‐CALIBER is shipped in a wooden crate. Hard‐shell case is available as
an option.
$49,767.73 $99,535.46
2.0 14096
Mini‐CALIBER RF Range Extender (1.3GHz Video/900MHz Data)
Increase the wireless operating Video/Data range of your Mini‐Caliber robot with the Mini‐CALIBER
RF Range Extender. Mounted on a portable tripod (additional suction cup and magnetic mounts
included), an additional transmitter and receiver can be directly connected to the CCU using a 20’
(6m) of hardwire tether. Key uses include: extending RF range; ability to have antennae’s mounted
outside armored vehicles. Includes one CAL‐EB3 MINI CCU battery pack. Battery charger not
included, as system uses CAL‐BC2 Mini CCU Battery Charger included with robot. Note: Available on
new MINI‐12X CALIBER robots only.
$7,647.18 $15,294.36
2.0 10003
Mini Claw Kit ‐ 2ND Generation
The 2nd generation claw attachment kit includes specially designed tools to augment the
capabilities of the Mini‐CALIBER® robot. Kit includes: key holder, PTZ camera extension to reach 9’
(3m) high, box cutters, clothes cutter, extension poles, tire deflator, finger extension with porcelain
tips, cutting hook, utility shears with ceramic blades, Cutabiner®, multiple effectors and hook & line
accessories.
$4,461.26 $8,922.52
2.0 CAL‐K4300‐
12IC
K4300‐12 – Tactical‐Swat Disrupter Kit
This 12 gauge 12 inch barrel disrupter is used for tactical purposes. The barrel is made from titanium
and has an ACME threaded muzzle end to accept the standard T3 disrupter smooth bore and rifle
bore tips. it can be fired as a 12 inch disrupter with a plastic thread protector on the muzzle end
threads. It is not designed to use water as a 12 inch disrupter, but can fire water shots if used with
the 3 smooth bore tip.This disrupter uses the standard T3 disrupter breech cap and plug. It can be
used in any standard PAN clamp. The muzzle end is larger than a standard PAN muzzle, so an over
the barrel PAN laser will not fit. You must use a bore sight laser or a larger over the barrel laser
adapter. 4300‐12 TACTICAL BARREL (12" TITANIUM) 1 4341 T3 PRO BREECH CAP 1 K4350PL PUSH
LOCK BREECH PLUG‐Assembled 1 7100 SHELL EXTRACTOR 1 7280 WATER BOTTLE 1 K3095T RED
AND BLACK PUGS (15 EA) 1 4330 T3 THREAD PROTECTOR 1 2001 SEATING TOOL 1 7110 FIRING PIN
TOOL 1 7250PL 7/16 NUT DRIVER 1 K3010PL PUSH LOCK BREECH PARTS KITContains: (4)Push Lock Y
Fittings; (2)Push Lock Couplings; (2)Firing Pins;(3)Springs; (1)Push Lock Fitting 1 2045 GUN BORE
CLEANING KIT 1 3130 WD‐40 1 K3150 ROBOT DISRUPTER SLEEVE (W/GREN LASERS) with Mini‐
CALIBER mount 1 3153 8' PARACORD LANYARD 1.
*Note: This product requires p/n: 10001 Mini Arm Picatinny Rail Assembly to attach mount to robot
arm.
**Note: Initiation system required. There are various options available for initiation. Typically, CAL‐
OP001 or CAL‐OP002 or 1680 Remote Firing Device are purchased with this system. For dynamic
breaching or missions where instantaneous initiation is required, low voltage pyrotechnic initiators
can be used. Contact your ICOR Representative for further information.
$4,617.62 $9,235.24
QUOTE
Page 2 of 2 QUO‐05498‐W6D7‐3
2.0 10001
MINI arm Picatinny Rail Assembly
Includes a clamp and Picatinny rail base plate which can be permanently attached to the Mini‐
CALIBER® arm with a quick disconnect Picatinny clamp extension assembly. Instruction manual and
mounting hardware included. Packaged in a cardboard box. For use with P/N 10002 ‐ K3150 Robot
Disruper Sleeve.
$361.59 $723.18
2.0 CAL‐OP001
Firing Circuit
24V DC Firing Circuit for Mini‐CALIBER® Robot $1,079.89 $2,159.78
1.0 CAL‐SP2
Mini Basic Spare Parts Kit
Essential items to maintain and repair your Mini‐CALIBER® robot $1,617.39 $1,617.39
2.0 CAL‐EB2
24V DC Battery Pack ‐ Mini
Spare/Replacement 24V DC Battery Pack for Mini‐CALIBER® Robot Includes: 2x 12.8V / 9.6 AH
LiFePO4 Replacement battery for use with the Mini‐CALIBER® Robot (note: The Mini‐CALIBER® uses
2 LiFePO4 batteries for 24V operation)
$640.12 $1,280.24
2.0 CAL‐BC3
Robot Battery Charger ‐ Mini
Spare Mini‐CALIBER robot dual battery charger. $200.34 $400.68
1.0 S&H
SHIPPING AND HANDLING
$1,500.00 $1,500.00
TOTAL $140,668.85
This is a quotation on the goods named, subject to the conditions noted below:
Unless otherwise provided: This quote is in US Dollars; shipping terms are EX WORKS for domestic and international shipments; all prices are exclusive of shipping costs, insurance, custom clearance and any applicable
Taxes of any kind; all price quotations are valid for 90 days. Published list prices are subject to change without notice. Due to a policy of continuous product improvement, ICOR reserves the right to change
specifications and appearance without notice. Please reference the invoice number on your cheque and remit to ICOR Technology Inc. 935 Ages Drive, Ottawa, Ontario K1G 6L3 Canada. The CALIBER® Robot (including
the MK3, T5, Mini, and MK4) contains up to 35% US‐source materials and are ITAR export license free and not subject to AECA or EAR regulations. The CALIBER® Robot is a Controlled Good, and requires an Export
Permit for international shipping in accordance with the Export and Import Permits Act (R.S.C., 1985, c. E‐19). Failure to perform due to the action or inaction of the Government of Canada will be considered Force
Majeure, and, ICOR is not responsible for any penalties, fees, liquidated damages, etc. Some or all of the quoted items are eligible for purchase through GSA’s Cooperative Purchasing Program and 1122 Program for
State and Local Law Enforcement. Please consult with your purchasing department to determine the optimal purchasing vehicle and notify your ICOR Sales Representative to make any changes necessary. ICOR’s
GSA Contract Number is: GS‐07F‐0430V
DISCLAIMER REGARDING DISRUPTER MOUNT CONFIGURATIONS: ICOR Technology is a robot manufacturer and do not make disrupters. The end‐user must consult with the disrupter manufacturer for complete
instructions on loading, operation, maintenance and firing procedures. ICOR recommends that the end‐user takes disrupter training from the manufacture before firing the weapon off of the robot. USE AT OWN
RISK. ANY POTENTIAL DAMAGES TO THE ROBOT AS A RESULT OF USING A DISRUPTER ARE NOT COVERED UNDER WARRANTY. AS PER ICOR ‘S LIMITED WARRANTY, WARNING AND LIMITATION OF LIABILITY
DOCUMENT, ICOR SHALL BE HELD HARMLESS TO ANY LOSS OR INJURY AS RESULT OF USING DISRUPTERS ON THE ROBOT.
*NOTICE OF COVID‐19 MANUFACTURING AND SHIPPING DELAY
The COVID ‐19 pandemic has posed unprecedented problems to the worldwide supply chain network, causing delays in the delivery of critical components needed to build CALIBER® robots. ICOR's top priority is to build
and deliver robots according to the order acknowledgement's timelines; nevertheless, we cannot be held liable for delays caused by restricted air cargo capacity and overburdened global logistics networks.
To accept this quotation, sign here and return:
Signature Date