6163 - Communication Supplies, 3.Statement of Work/ Specifications (2)
The scope of work shall be finalized upon the selection of the Firm. The respondent’s submission shall have accurately described your understanding of the objectives and scope of the
requested products and services and provided an outline of your process to implement the requirements of the Scope of Work and Services. It is anticipated that the scope of work will
include, at a minimum, the following:
SECTION A: COMMUNICATIONS SUPPLIES BRAND ONLY
1. BELDEN # 5288US: CABLE, SIAMESE CAT 5E +16/2STR, R/W, 1000'/RL; ONLY
Beldon Multi Conductor Category 5E Non-bonded- Pair Cable: CAT 5E (200 MHz) 4 pair U/UTP Unshielded , Riser-CMR, Premise Horizontal Cable, 24 AWG Solid Bare Copper Conductors, Polyolefin
Insulation, Ripcord, PVC Jacket (equivalent to Insulation Material: PO Polyolefin
Outer Shield Material: Unshielded
Outer Jacket Material: PVC- Polyvinyl Chloride
Outer Jacket Diameter: 0.19
Applicable Specifications and Agency Compliance
NEC/ (UL) Specification CMR
NEC Articles: 800
CEC/C (UL) Specification CMR
EU directive 2011/65/EU (ROHS II) Yes
Other Standards ISO/IEC ed. 2.1 (2008) Class D
Telecommunication Standards Category 5E- TIA 568.C.2
Other Specifications NEMA WC-63.1 Category 5E
2. BELDEN # BDN25R/ HITACHI #30093-50: CABLE, 25PAIR CAT5E (2500'/RL), ONLY
Acceptable brands:
Beldon IBDN25R Multi Conductor Category 5E Non-bonded- Pair Cable: CAT 5E (100 MHz) 25- pair U/UTP Unshielded , Riser-CMR, Premise Backbone Cable, 24 AWG Solid Bare Copper Conductors,
Polyolefin Insulation, Ripcord, PVC Jacket (Insulation Material: PO Polyolefin
Outer Shield Material: Unshielded
Outer Jacket Material: PVC- Polyvinyl Chloride
Overall Nominal Diameter: 0.510 in
Applicable Specifications and Agency Compliance
NEC/ (UL) Specification CMR
CEC/C (UL) Specification CMR
EU directive 2011/65/EU (ROHS II) Yes
Telecommunication Standards Category 5E- TIA 568.C.2
Other Specifications NEMA WC-63.1 Category 5E
Hitachi SKU: 30093-50 Description: Hitachi, Cat5e PowerSum Riser Cable; 25-Pair, 24 AWG Solid, Bare Copper, UTP
/
/
3. ANIXTER WIRE, ANIXTER #6G-1401-02: WIRE, TRACE 19STR BARE CU, 2500’SPOOL,ONLY
APPROVED MANUFACTURERS | 6G-1401-02 | Cable, 14 AWG, 1 Conductor, THHN/THWN 19STR bare copper 90C 600V color black. Anixter #:6G-1401-02
/
/
MULTI LINK REPLACEMENT PANEL #FRM-E-4RU/ #10-4534 : CABINET, 72 PATCH PANEL, FRM-4RU-12X-TS, ONLY
Enclosure, Rack Mount, with Slide out Tray, Multilink FRM-4RU-12X-TS (10-4534) Holds 12 panels
General Specifications:
Dimensions: 7.12” H x 17.0” W x 13.25” D
Capacity: The unit can support patching, patching and splicing
- Terminations: (12) Multilink Termination Panels,
- Splices: Up to 96 single fused fiber splices using four 2000-SSTA splice trays
Material: .060” Aluminum
Coatings: Electro statically applied powder coat, black
5. DAKOTA BEAM BREAKER SENSOR - ALERT #BBT-2500: ONLY
The BBA-2500 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that
are recharged through the solar panels during the day. Because the unit is self-powered there is no need to run wires for power. Installation time can be as little as a few minutes.
The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-2500 receiver up to half mile away* anytime someone passes between the sensors.
The break beam sensor is a point to point sensor and will not be activated by any motion outside of the monitored beam. The sensors are not affected by small objects such as falling
leaves or birds. It can be mounted high enough to avoid dogs and other animals but it will detect any intruder walking through the beam area. The beam sensor is ideal for outdoor applications
such as storage lots, lumber yards, car dealerships, etc. Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter.
Operating Range: -30°F to 120°F
6. AFL ADHESIVE -AFL #S008720: RIBBON FORMING 4OZ, FAA-03, ONLY
/
7. SLEEVE –CESI # 680X640: 40MM RIBBON (50/PKG), #PS-99-X40C, ONLY
/
8. 3M SPLICE CASE-2178LL: X-LARGE FIBER, 3M, ONLY
3M™ Fiber Optic Splice Closure 2178-LL/FR
3M ID 80611008865 UPC# 00051138708429 Part Number 2178-LL/FR
3M™ Fiber Optic Splice Closure 2178-XL is designed to meet all common needs and field conditions. The unique strength of the member clamp assembly avoids cable sheath movement with temperature
changes. This flame-retardant closure is ideal for wall-mount, aerial strand-mount, pedestal, underground and pole-mount applications.
3M™ Fiber Optic Splice Closure 2178-XL is made with a highly chemical-resistant material, enabling use use in buried, underground and aerial applications. This closure is easy to install,
easy to use and easy to re-enter. It provides a separate area for routing, protecting and expressing buffer tubes and ribbon fibers.
Multi-port grommets offer entry for drops or cables
Easy to install, easy to use and easy to re-enter
Designed for aerial strand-mount, buried, pedestal and underground applications
Measures 21.9 in x 8.5 in x 11.3 in
Includes tray support, gasket, air valve, bolts and cable strain relief, 6 sealing washer trees, 2 plugs, 4 cable ties, 1 sheath scuff, 3 hose clamps, 3 K-connectors and more
Maximum capacity of 288 single-fusion and 864 mass-fusion splices
Made of chemical-resistant material
Watertight seal
Comes with 3 cable entry kits and 2 ground lugs
Designed for inline and butt splicing configurations
3M BRACKET KIT- 3M 2197: AERIAL HANGER, ONLY
3M™ Aerial Hanger Bracket Kit 2197
3M ID 80610756100 UPC# 00054007922223 Part Number 2197
3M™ Aerial Hanger Bracket Kit incorporates all necessary hardware for aerial installation of a 3M™ Fiber Optic Splice Closure 2178. The bracket is made of stainless-steel material for
additional durability.
3M™ Aerial Hanger Bracket Kit comes with an adjustable aerial hanger bracket that is ideal for use with 3M Fiber Optic Splice Closure 2178 Series. This bracket can also be used with
closures that have 1- or 2-cable addition kits. The kit provides additional hardware to attach the splice closure cover to the bracket base and includes 6 corner inserts, 12 nuts, 2
flexible hinges, 2 "L" brackets, 2 bonding/hanger brackets and 2 bolts with washers.
Includes required hardware for aerial installation
Comes with tools to attach the splice closure cover to bracket base
Suitable for use with 3M™ Fiber Optic Splice Closures 2178-S, 2178-SL, 2178-LS and 2178-LL Series
Accommodates 2178 splice closures with 1 or two 2181 cable addition kits
Bracket has stainless-steel construction for additional durability
Includes 6 corner inserts, 12 nuts, 2 flexible hinges, 2 "L" brackets, 2 bonding/hanger brackets and 2 bolts with washers
1/pack
3M SPLICE CASE - 3M 2181: SPLICE CASE L/S EXPANSION KIT, ONLY
3M™ Cable Addition Kit 2181-LS/FR, Fire Retardant
3M ID 80611012859 UPC# 00051138754143 Part Number 2181-LS/FR
3M™ Cable Addition Kit is designed for the fire retardant 3M™ Fiber Optic Splice Closure 2178-LS. The kit includes 3 cable entry hardware kits, a gasket and materials for installing
additional cables.
Compatible with 3M™ Fiber Optic Splice Closure 2178-LS/FR
Includes gasket and materials for installing additional cables
Flame retardant
1 kit/pack
SECTION B: COMMUNICATIONS SUPPLIES BRAND EQUIVALENTS
11. BULK HEAD, FIBER ST SINGLEMODE- MULTILINK MST-06-C-BLK-#99234K
/
12. BULK HEAD FIBER LC - MULTI LINK - MLCD-12-SM-C-BLK :
/
13. RIBBON FIBER PROTECTOR, Multi- Link #065-383-10
/
14. FANOUT KIT FIBER LC TO RIBBON, CESI# GT-SM12RRN924LCUOED0-002
FIBER PIGTAILS- LC
FEATURES
-100% End-face geometric specification controlled -Customer special assemblies available
- Telcordia GR-326-CORE Standard - Low insertion loss and back reflection loss -Good
Exchangeability -Good durability
-High temperature stability
SPECIFICATIONS
Single mode
Multimode
Insertion Loss
≤0.50 dB max (PC)
≤0.50 dB max (UPC)
≤0.50 dB max (APC)
≤0.20 dB (PC)
Return Loss
≥45 dB (PC)
≥55 dB (UPC)
≥65 dB (APC)
Interchangeability
≤0.20 dB (Connect Randomly)
Tensile Strength
0-15kg
Vibration
≤0.20 dB (5-50Hz,1.55mm Amplitude)
Operating Temperature
-40 to +80 ℃
14. CESI FANOUT KIT FIBER LC TO RIBBON- CESI# GT-SM12RRN924LCUOED0-002
FIBER PIGTAILS- LC (cont’d)
GEOMETRIC SPECIFICATION OF FINISHED END-FACE
PC CONNECTOR
APC CONNECTOR
Radius of Curvature
10-25 mm
5-15 mm
Apex Offset
≤50 um
≤100 um
Fiber Spherical Height
-90 nm,+50 nm
Angular Offset
8±0.5 ℃
ODERING OPTIONS
End-face Finishing
PC,UPC,APC
Fiber Mode
SM9/125um: G652Dhttp://www.oemarket.com/product_info.php?products_id=145
MM :62.5/125um or 50/125um
Cord Diameter
0.9mm,2.0mm,3.0mm
Cable Length
Customized
Fiber count
Duplex(2),4,6,8 & 12 fibers
/
15. CESI FANOUT KIT FIBER ST TO RIBBON, CESI# GT-SM12RRN924STUOED0-002
FIBER OPTIC PATCH CORD
SM, 12 Fiber, Ribbon Riser Non-Armored, 900um 24" Legs(color coded), Flat Fan-Out Kit, ST-UPC to Blunt, No Pull Eye, 2 meter
/
15. CESI FANOUT KIT FIBER ST TO RIBBON, CESI# GT-SM12RRN924STUOED0-002 (cont’d)
/
16. CESI H-BRACKET, W/LARGE HOOKS, CESI# CESLIVE CPFI-HBRK-LH
CPFI-HBRKS-LH:
Made out of T6061 High Quality Aluminum for Light Weight and yet very strong. Adjustable hooks for varying size of wire coils.