Loading...
Exhibit 2 - Cooperative PricingResponse Attachments Licenses.pdf License Base Model Pricng Buy Board 651-21 2021-04-29 Final.xlsx Base in Excel Option list for Buy Board 651-21 Final 2021-04-29.xlsx Options in Excel Bid Lines 1 Section I: Commercial Class "A" Pumpers and Tankers - 2-Dr. Cab, 35000# GVW, 300 HP Automatic, A/C - 1250 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment, diesel 300 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 2-door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$230,641.00 Total:$230,641.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes:NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 4 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 2 Section I: Commercial Class "A" Pumpers and Tankers - 2-Dr. Cab, 35000# GVW, 350 HP Automatic, A/C - 1500 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment, Diesel 350 HP engine, heavy duty cooling, 270 amp alternator, Allison HD series automatic transmission, Full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 2-door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$285,026.00 Total:$285,026.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 5 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 3 Section I: Commercial Class "A" Pumpers and Tankers - 2-Dr. Cab, 40000# GVW, 300 HP Automatic, A/C - 1250 GPM Pump, 1500 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment, Diesel 300 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 2 door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$311,149.00 Total:$311,149.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes:NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 6 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 4 Section I: Commercial Class "A" Pumpers and Tankers -2-Dr. Cab, 54000# GVW, 350 HP Automatic, A/C - 1500 GPM Pump, 2500 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, rear Newton electric dump, NFPA 1901, all manufacturer's standard equipment, diesel 350 HP engine, heavy duty cooling, 270 amp alternator, Allison HD series automatic transmission, full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 2-door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$338,180.00 Total:$338,180.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS.. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 7 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 5 Section I: Commercial Class "A" Pumpers and Tankers -2-Dr. Cab, 35000# GVW, 300 HP Automatic, A/C - 1250 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$287,631.00 Total:$287,631.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Alternate 1 Section I: Commercial Class "A" Pumpers and Tankers -2-Dr. Cab, 35000# GVW, 300 HP Automatic, A/C - 1250 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$268,780.00 Total:$268,780.00 Manufacturer:Skeeter Manufacturer #:Skeeter Page 8 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 Item Attributes 1. State Brand of Chassis and Body Freightliner 6 Section I: Commercial Class "A" Pumpers and Tankers -4-Dr. Cab, 35000# GVW, 300 HP, Automatic, A/C -1250 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$299,372.00 Total:$299,372.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 9 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 7 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom MFD tilt 4-Dr. Cab, 330 HP Automatic, A/C - 1250 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$485,861.00 Total:$485,861.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes:NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Saber Page 10 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 8 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom LFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 750 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$548,895.00 Total:$548,895.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 11 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 9 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom MFD tilt 4-Dr. Cab, 330 HP Automatic, A/C - 1250 GPM Pump, 750 gallon poly tank, 200 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$500,061.00 Total:$500,061.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Saber Page 12 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 10 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom LFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 750 gallon poly tank, 200 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$661,389.00 Total:$661,389.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 13 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 11 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom MFD tilt 4-Dr. Cab, 330 HP Automatic, A/C - 1250 GPM Pump, 1500 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$524,607.00 Total:$524,607.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Saber Page 14 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 12 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom LFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 1500 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$657,193.00 Total:$657,193.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.) are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 15 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 13 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom MFD tilt 4-Dr. Cab, 330 HP Automatic, A/C - 1250 GPM Pump, 2500 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$630,935.00 Total:$630,935.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 16 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 14 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom LFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 2500 gallon poly tank, 100 cu. ft. compartment space, side mount pump panel, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$688,452.00 Total:$688,452.00 Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 17 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 15 Section II: Custom Cab Class "A" Pumpers and Tankers - Custom MFD tilt 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 3000 gallon elliptical tank, 60 cu. ft. compartment space, side mount pump panel, (2) side and (1) rear Newton electric dump, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$674,574.00 Total:$674,574.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 18 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 16 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 330 HP Automatic, A/C - 1500 GPM Pump, 400 gallon poly tank, 150 cu. ft. compartment space, single axle body, 75' aerial ladder rear mount, pinned waterway, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$908,894.00 Total:$908,894.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 19 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 17 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 400 gallon poly tank, 150 cu. ft. compartment space, single axle body, 75' aerial ladder rear mount, pinned waterway, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$958,981.00 Total:$958,981.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 20 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 18 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 hHP Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, tandem axle, 100' aerial ladder rear mount, pinned waterway, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$1,150,756.00 Total:$1,150,756.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 21 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 19 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt 4-Dr. Cab, 400 HP, Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, tandem axle, 85' to 95' aerial ladder platform rear mount, pinned waterway, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$1,293,330.00 Total:$1,293,330.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes:NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 22 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 20 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt 4-Dr. Cab, 400 HP, Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, tandem axle, 100'+ aerial ladder platform rear mount, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$1,364,537.00 Total:$1,364,537.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 23 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 21 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP, Automatic, A/C - 1500 GPM Pump, 200 gallon poly tank, maximum compartment space, tandem axle, 100'+ aerial platform articulating style, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 24 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 22 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 400 gallon poly tank, 150 cu. ft. compartment space, single axle body, 75' aerial ladder mid-mount, pinned waterway, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 25 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 23 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP, Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, tandem axle, 100' aerial ladder mid- mount, pinned waterway, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$1,327,279.00 Total:$1,327,279.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 26 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 24 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP, Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, single axle, 70-85' aerial ladder platform mid-mount, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 27 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 25 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, tandem axle, 85' to 95' aerial ladder platform mid-mount, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 28 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 26 Section III: Aerial Ladder and Aerial Platform Devices - Custom MFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C - 1500 GPM Pump, 300 gallon poly tank, 150 cu. ft. compartment space, tandem axle, 100'+ aerial ladder platform mid-mount, NFPA 1901, all manufacturer's standard equipment. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$1,357,391.00 Total:$1,357,391.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 29 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 27 Section IV: Rescue Vehicles, Non-Walk-In Style- 2-Dr. Cab, 35000# GVW, 300 HP Automatic, A/C - Non Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000 watt light tower, 10 shelves, 4 roll out trays, diesel 300 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 2-door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$264,821.00 Total:$264,821.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 30 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 28 Section IV: Rescue Vehicles, Non-Walk-In Style- 4-Dr. Cab, 35000# GVW, 300 HP, Automatic, A/C - Non Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000 watt light tower, 10 shelves, 4 roll out trays, diesel 300 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 4-door with individual air ride driver seat, SCBA high back officer seat, 3 SCBA high back crew seats with SCBA brackets west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$276,187.00 Total:$276,187.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Freightliner Page 31 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 29 Section IV: Rescue Vehicles, Non-Walk-In Style- Custom MFD tilt, 4-Dr. Cab, 330 HP, Automatic, A/C, Raised Roof – Non-Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000- watt light tower, 10 shelves, 4 roll out trays. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$567,790.00 Total:$567,790.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 32 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 30 Section IV: Rescue Vehicles, Non-Walk-In Style- Custom LFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C, Raised Roof - Non-Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000- watt light tower, 10 shelves, 4 roll out trays. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$665,237.00 Total:$665,237.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 33 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 31 Section IV: Rescue Vehicles, Non-Walk-In Style- 2-Dr. Cab, 60" cab to axle, A/C – Non-Walk-In 10' Light Duty rescue, maximum compartment space, 5Kw Honda generator, roll up doors, 4 shelves, 2 roll out trays, 12,500# GVW, 250 HP diesel engine, heavy duty cooling, dual 110 amp alternator, automatic transmission, power disc front and rear brakes, standard frame, chrome front bumper, minimum 30 gallon fuel tank, 2 door cab with bench seat, mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$176,304.00 Total:$176,304.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Ford Page 34 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 32 Section IV: Rescue Vehicles, Non-Walk-In Style- 2-Dr. Cab, 60" cab to axle, A/C – Non-Walk-In 10' Light Duty rescue, maximum compartment space, 5Kw Honda generator, roll up doors, 4 shelves, 2 roll out trays, 12,500# GVW, 250 HP diesel engine, heavy duty cooling, dual 110 amp alternator, automatic transmission, power disc front and rear brakes, standard frame, chrome front bumper, minimum 30 gallon fuel tank, 2 door cab with bench seat, mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$182,573.00 Total:$182,573.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Ford Page 35 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 Alternate 1 Section IV: Rescue Vehicles, Non-Walk-In Style-2-Dr. Cab, 60" cab to axle, A/C – Non-Walk-In 10' Light Duty rescue, maximum compartment space, 5Kw Honda generator, roll up doors, 4 shelves, 2 roll out trays, 12,500# GVW, 250 HP diesel engine, heavy duty cooling, dual 110 amp alternator, automatic transmission, power disc front and rear brakes, standard frame, chrome front bumper, minimum 30 gallon fuel tank, 2 door cab with bench seat, mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$148,667.00 Total:$148,667.00 Manufacturer:Skeeter Manufacturer #:Skeeter Item Attributes 1. State Brand of Chassis and Body Ford Page 36 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 33 Section V: Rescue Vehicles, Walk-In Style- 2-Dr. Cab, 35000# GVW, 300 HP Automatic, A/C - Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000 watt light tower, 10 shelves, 4 roll out trays, diesel 300 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, Full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 2-door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 37 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 34 Section V: Rescue Vehicles, Walk-In Style- 4-Dr. Cab, 35000# GVW, 300 HP, Automatic, A/C - Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000 watt light tower, 10 shelves, 4 roll out trays, diesel 300 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, Full air brakes, 12.0 compressor, steel channel frame, chrome front bumper, minimum 45 gallon fuel tank, 4-door with individual air ride driver seat, SCBA high back officer seat, 3 SCBA high back crew seats with SCBA brackets west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel ten hole disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 38 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 35 Section V: Rescue Vehicles, Walk-In Style- Custom MFD tilt, 4-Dr. Cab, 330 HP Automatic, A/C, Raised Roof - Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000 watt light tower, 10 shelves, 4 roll out trays. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$575,007.00 Total:$575,007.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Enforcer Page 39 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 36 Section V: Rescue Vehicles, Walk-In Style- Custom LFD tilt, 4-Dr. Cab, 400 HP Automatic, A/C, Raised Roof - Walk-In 16' Heavy rescue body, maximum compartment space, 8Kw PTO generator, 6000 watt light tower, 10 shelves, 4 roll out trays. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$722,770.00 Total:$722,770.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Velocity Page 40 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 37 Section V: Rescue Vehicles, Walk-In Style- 2-Dr. Cab, 84" cab to axle, A/C - Walk-In 12' Light Duty rescue, maximum compartment space, 5Kw Honda generator, roll up doors, 4 shelves, 2 roll out trays, 15,000# GVW, 250 HP diesel engine, heavy duty cooling, duel 110 amp alternator, automatic transmission, power disc front and rear brakes, standard frame, chrome front bumper, minimum 30 gallon fuel tank, 2-door cab with bench seat, mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 41 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 38 Section V: Rescue Vehicles, Walk-In Style- 2-Dr. Cab, 170" cab to axle, A/C - Walk-In 14' Light Duty rescue, maximum compartment space, 5Kw Honda generator, roll up doors, 4 shelves, 2 roll out trays, 20,000# GVW, diesel 240 HP engine, heavy duty cooling, 270 amp alternator, Allison MD series automatic transmission, Full air brakes, 12.0 compressor, steel channel frame, 170" cab to axle, chrome front bumper, minimum 45 gallon fuel tank, 2-door with bench seat, west coast mirrors, air conditioner, tilt-telescoping steering wheel, full gauge package, tires to match axle GVW rating, steel disc wheels. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 42 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 39 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x2, 60" C/A, A/C, 15,000# GVW - Aluminum body, maximum compartment space, 300-340 gallon poly tank, booster reel with hose, 26HP diesel powered pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 43 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 40 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x4, 60" C/A, A/C, 15,000# GVW - Aluminum body, maximum compartment space, 300-340 gallon poly tank, booster reel with hose, 26HP diesel powered pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Alternate 1 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x4, 60" C/A, A/C, 15,000# GVW - Aluminum body, maximum compartment space, 300-340 gallon poly tank, booster reel with hose, 26HP diesel powered pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$122,555.00 Total:$122,555.00 Manufacturer:Skeeter Manufacturer #:Skeeter Page 44 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 Item Attributes 1. State Brand of Chassis and Body Ford 41 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x4, 60" C/A, A/C, 15,000# GVW - Aluminum Body, 500 gallon poly tank, booster reel with hose, 100 gpm pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$235,200.00 Total:$235,200.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Ford Alternate 1 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x4, 60" C/A, A/C, 15,000# GVW - Aluminum Body, 500 gallon poly tank, booster reel with hose, 100 gpm pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$114,450.00 Total:$114,450.00 Manufacturer:Skeeter Manufacturer #:Skeeter Page 45 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 Item Attributes 1. State Brand of Chassis and Body Ford 42 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x2, 17500# GVW, 275 HP Diesel - Aluminum Body, 500 gallon poly tank, booster reel with hose, 100 gpm pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 46 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 43 Section VI: Quick Attack and Brush Type Vehicles- 4-Dr. Cab, 4x4, 17500# GVW, 275 HP Diesel, Manual Transmission - Aluminum Body, maximum compartment space, 250 gallon poly tank, 500 gpm PTO pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each Price:$237,043.00 Total:$237,043.00 Manufacturer:Pierce Manufacturer #:Pierce Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body Ford Page 47 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 44 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x4, 17500# GVW, 275 HP Diesel, Manual Transmission - Aluminum body, maximum compartment space, 300 gallon poly tank, 500 gpm pump. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 48 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 45 Section VI: Quick Attack and Brush Type Vehicles- 2-Dr. Cab, 4x2, 300 HP, Automatic, A/C - Aluminum Body, maximum compartment space, 500 gallon poly tank, 50 gallon foam, booster reel with hose, 400 gpm diesel driven pump with Foam Pro 2100 system or equal. Include separate sheet with upgrade options to include all manufacturer options including alternative fuel choice equipment (CNG, LPG, etc.) Quantity:1 UOM:Each No Bid Manufacturer:No response Manufacturer #:No response Item Notes: NOTE 1:Vendors should propose direct replacement models if a model type specified below has been discontinued by the manufacturer. All fire service apparatus vehicles must meet or exceed and comply with all requirements of the Federal Motor Vehicle Safety Standards, FMVSS. All vehicle fees to be charged for any purchase from this contract with the exception of delivery fees (i.e. pre delivery inspection, make ready, applicable state inspection fee, manufacturer destination fees, etc.)are to be included in the base price(s). Vehicle fees not included in the base price(s) will not be allowed. The Cooperative service fee for vehicles is not a “vehicle fee” and is not to be included in the base pricing. NOTE 2: An awarded Vendor must be approved by the manufacturer to sell, install, and service the brand of equipment submitted. Proposers responding to this Proposal Invitation should submit an approval letter from each manufacturer. Manufacturer authorization letters must include the regions and/or states in which equipment may be sold. NOTE 3: Vendors must provide a copy of their Franchise Motor Vehicle Dealer Certificate from Texas Department of Motor Vehicles and Manufacturer certificate from the Texas Department of Motor Vehicles or, if vendor proposes to serve states outside of the State of Texas, the applicable dealer license(s) for such state(s). Item Attributes 1. State Brand of Chassis and Body No response Page 49 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 46 Section VII: OPTIONAL EQUIPMENT and PARTS-Discount (%) off catalog/pricelist for Original Equipment Manufacturer (OEM) Options. Catalog/Pricelist MUST be included or proposal will not be considered. Total:0% Item Notes: Options will be selected by the Cooperative member at the time of order. A COMPLETE LIST OF ALL OPTIONAL EQUIPMENT AND PARTS MUST BE SUBMITTED WITH PROPOSAL FOR PROPOSAL TO BE CONSIDERED! Vendors proposing various manufacturer product lines per line item must submit the information as follows or proposal may not be considered: Vendor's must list one specific percentage discount for each Manufacturer listed. Additional/Alternate Manufacturer lines must submitted by selecting "Add Alternate." Item Attributes 1. State Name of Catalog/Pricelist 0% off list Page 50 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 47 Section VII: OPTIONAL EQUIPMENT and PARTS-Discount (%) off catalog/pricelist for Third Party (not OEM) and Unpublished Options and Equipment. Catalog/Pricelist MUST be included or proposal will not be considered. Total:5% Item Notes: Options will be selected by the Cooperative member at the time of order. A COMPLETE LIST OF ALL OPTIONAL EQUIPMENT AND PARTS MUST BE SUBMITTED WITH PROPOSAL FOR PROPOSAL TO BE CONSIDERED! Vendors proposing various manufacturer product lines per line item must submit the information as follows or proposal may not be considered: Vendor's must list one specific percentage discount for each Manufacturer listed. Additional/Alternate Manufacturer lines must submitted by selecting "Add Alternate." Item Attributes 1. State Name of Catalog/Pricelist All vendor Page 51 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 48 Section VII: OPTIONAL EQUIPMENT and PARTS-Discount (%) off catalog/pricelist for Original Equipment Manufacturer (OEM) Parts. Catalog/Pricelist MUST be included or proposal will not be considered. Total:5% Item Notes: Options will be selected by the Cooperative member at the time of order. A COMPLETE LIST OF ALL OPTIONAL EQUIPMENT AND PARTS MUST BE SUBMITTED WITH PROPOSAL FOR PROPOSAL TO BE CONSIDERED! Vendors proposing various manufacturer product lines per line item must submit the information as follows or proposal may not be considered: Vendor's must list one specific percentage discount for each Manufacturer listed. Additional/Alternate Manufacturer lines must submitted by selecting "Add Alternate." Item Attributes 1. State Name of Catalog/Pricelist OEM 49 Section VII: OPTIONAL EQUIPMENT and PARTS-Discount (%) off catalog/pricelist for Extended Service Maintenance Agreements.Catalog/Pricelist MUST be included or proposal will not be considered. Total:5% Item Notes: Options will be selected by the Cooperative member at the time of order. A COMPLETE LIST OF ALL OPTIONAL EQUIPMENT AND PARTS MUST BE SUBMITTED WITH PROPOSAL FOR PROPOSAL TO BE CONSIDERED! Vendors proposing various manufacturer product lines per line item must submit the information as follows or proposal may not be considered: Vendor's must list one specific percentage discount for each Manufacturer listed. Additional/Alternate Manufacturer lines must submitted by selecting "Add Alternate." Page 52 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 Item Attributes 1. State Name of Catalog/Pricelist 0 off list 50 Section VII: OPTIONAL EQUIPMENT and PARTS-Discount (%) off catalog/pricelist for Floor Plan Insurance and Lot Insurance (dealer inventory fire service apparatus vehicle). Catalog/Pricelist MUST be included or proposal will not be considered. Total:0% Item Notes: Options will be selected by the Cooperative member at the time of order. A COMPLETE LIST OF ALL OPTIONAL EQUIPMENT AND PARTS MUST BE SUBMITTED WITH PROPOSAL FOR PROPOSAL TO BE CONSIDERED! Vendors proposing various manufacturer product lines per line item must submit the information as follows or proposal may not be considered: Vendor's must list one specific percentage discount for each Manufacturer listed. Additional/Alternate Manufacturer lines must submitted by selecting "Add Alternate." Item Attributes 1. State Name of Catalog/Pricelist 5 off list Page 53 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 51 Section VII: OPTIONAL EQUIPMENT and PARTS-Discount (%) off catalog/pricelist for Other Fire Apparatus Products and Services (refurbishing, modification, uplifting, remounting services and equipment). Total:5% Item Notes: Options will be selected by the Cooperative member at the time of order. A COMPLETE LIST OF ALL OPTIONAL EQUIPMENT AND PARTS MUST BE SUBMITTED WITH PROPOSAL FOR PROPOSAL TO BE CONSIDERED! Vendors proposing various manufacturer product lines per line item must submit the information as follows or proposal may not be considered: Vendor's must list one specific percentage discount for each Manufacturer listed. Additional/Alternate Manufacturer lines must submitted by selecting "Add Alternate." Item Attributes 1. State Name of Catalog/Pricelist 5 off list 52 Section VIII: Delivery Fees and Labor Rate for Installation and Repair Service of Fire Service Apparatus Vehicles - Hourly Labor Rate for Installation/Repair Service of Fire Apparatus Vehicles Equipment and Products- not to exceed hourly labor rate for Installation/Repair Service of Equipment and Products. Quantity:1 UOM:Hour Price:$145.00 Total:$145.00 53 Section VIII: Delivery Fees and Labor Rate for Installation and Repair Service of Fire Service Apparatus Vehicles - Per Mile Delivery Fee for Fire Service Apparatus Vehicles - state the per mile delivery fee for fire service apparatus vehicles. Quantity:1 UOM:Each No Bid Response Total: $19,388,211.00 Page 54 of 54 pages Vendor: Siddons-Martin Apparatus and Equipment Fire Apps 651-21 Code or Part No. Option Description Offered Price 101 Add Frame liner Commercial $1,301.00 102 Add Frame Liner Custom $2,343.00 103 Aerial Frame liner $5,265.00 104 Galvanized Frame structure $4,493.00 105 upgrade to 22,800# front axle $4,840.00 106 upgrade to 24,000# front axle $6,985.00 107 upgrade to 27,000# rear axle $5,644.00 108 upgrade to 31,000# rear $7,449.00 109 upgrade rear single axle to 33,500#$8,208.00 110 Upgrade Rear Axle, 48,000#$8,856.00 111 Upgrade Rear Axle, 58,000#$10,957.00 112 TAK-4 Suspension $18,279.00 113 T3 Steer Single Suspension $17,047.00 114 T3 Steer Tandem Suspension $20,900.00 115 Change to Air Ride Suspension, Single $8,027.00 116 Change to Air Ride Suspension, Tandem $7,282.00 117 Change to Dynalastic Suspension $5,075.00 118 4 x 4 Option Commercial $27,821.00 119 4 x 4 Option Custom $39,101.00 120 Tire Chains - Rear Axle $4,982.00 121 Auto Lube, 22 point $6,209.00 122 Auto Lube 34 Point $11,507.00 123 Aluminum Wheels Commercial ( Rear)$1,085.00 124 Custom Aluminum Wheels, front $3,296.00 125 Aluminum Wheels, Rear Single Axle $4,120.00 126 Aluminum Wheels Tandem Axle $8,241.00 127 Spare Steel Wheel and Mounted tire $2,987.00 128 Electronic Tire Pressure Management $2,275.00 129 Safety Bands (pair)$2,244.00 130 Mud Flaps $706.00 131 Single Rear flap $575.00 132 Wheel Chocks and Mounts $1,304.00 133 Disc Brakes Front $2,494.00 134 Disc Brakes, Rear, Single $872.00 135 Disc Brakes, Rear, Tandem (per)$1,883.00 136 Brake Lock $2,792.00 137 Upgrade ABS/ATC $1,518.00 138 ABS upgrade to ESC/ABS/ATC $3,361.00 139 Collision Mitigation $3,159.00 140 HAAS Alert (R2R)$3,187.00 141 Upgrade Air Dryer $417.00 142 Air inlet-outlet $627.00 143 Additional Air Tanks $439.00 144 12 or 120 volt air compressor $1,841.00 145 Brake fittings compression type $2,076.00 146 Remote tank drain $759.00 147 Upgrade Engine to L9 300 hp $2,202.00 148 Upgrade Engine L9 300 hp to L9 360 hp $4,332.00 149 Paccar 350 to 380 $1,520.00 150 Cummins L9 400hp to 450 $2,127.00 151 Cummins L9 450hp to Cummins X12 500 HP $29,311.00 152 Cummins 450 to Paccar MX13 510 $23,331.00 153 Cummins X12 to X15 $16,221.00 154 Upgrade Cummins, X12 455 hp to 500 hp $3,449.00 155 Cummins X15 565 to 600 hp $6,421.00 156 Remote Mount oil/fuel filters $2,979.00 157 Heater shut-off valves $467.00 158 Power Converter $4,597.00 159 Idle Reduction Technology $11,697.00 160 Emergency Shutdown for Engine, Air w/ reset $2,270.00 161 1000 Watt Immersion Heater $605.00 162 Exhaust brake to Engine Brake Commercial $1,988.00 163 EVS 3000 to 4000 $9,772.00 164 EVS 4000 to 4500 $11,434.00 165 Retarder Transmission $13,184.00 166 Aggressive Down shift $164.00 167 Telma Retarder, Single Axle $17,201.00 168 Exhaust Extension Plymo or Nederman $757.00 169 Magnetic Grabber $1,004.00 170 Exhaust Diffuser - Care $1,370.00 171 Magnetic Grabber $4,390.00 172 Increase DEF Capacity $892.00 173 Dual Fuel Tank Fills $1,360.00 174 75 gallon fuel tank $1,360.00 175 Lines, Fuel, Wire Braided, Reusable Fittings $837.00 176 Electric Cab Fans (2)$605.00 177 Upgrade AC, CARE $1,632.00 178 Aluminum Plenum A/C $907.00 179 Upgrade Dash to Metal $1,776.00 180 110 Volt cab A/C $2,978.00 181 Danhard Style A/C $7,429.00 182 Dual type A/C upgrades $12,978.00 183 Steering with controls $1,770.00 184 Add Extended Bumper $2,009.00 185 Add 26" Extended underslung Bumper $6,061.00 186 Bumper tray with cover $1,087.00 187 Bumper Sight Rod $696.00 188 Bumper compartment for Winch $2,021.00 189 Bumper Equipment Tray with cover $2,847.00 190 Bumper warning light recess $1,098.00 191 Linex Bumper Coating $690.00 192 Electric Power Only, Portable Winch $223.00 193 Winch 12,000#$6,465.00 194 Winch 9000#$3,695.00 195 Hitch, Receiver, Front, 10,000 lbs, Custom Chassis $1,036.00 196 Mirrors - change to Bus style cab corner $3,654.00 197 Mirrors - change to door mount bus style $2,888.00 198 Mirrors - change to One-Eleven style $2,626.00 199 Raised roof, custom cab $2,694.00 200 Extended Cab $6,225.00 201 Full height Cab doors - Raised Roof $2,554.00 202 Stainless Door Jamb Scuffplates $821.00 203 Aluminum Treadplate on Cab roof $1,149.00 204 Mounting plate on engine tunnel $524.00 205 Recessed Dash $553.00 206 Electric Windows $2,377.00 207 Electric Door locks $1,384.00 208 Key Pad, Electric Door locks $532.00 209 Driver Controlled Differential Lock, Tandem, Interlocked to Interaxle Lock $3,450.00 210 Commercial Safety System $5,573.00 211 Safety System $11,531.00 212 Driver Safety Seat $1,182.00 213 SCBA Safety Seat $1,477.00 214 Valor/Bostrom Officer SCBA $1,915.00 215 Valor/Bostrom 2 F-Facing Crew $2,804.00 216 3 Seat to Crew (Commercial)$3,989.00 217 Hands Free SCBA Bracket (ea)$875.00 218 Clean Cab base option $1,734.00 219 Vinyl Flooring $784.00 220 EMS Boxes $1,149.00 221 EMS Compartment in Cab $2,596.00 222 EMS Compartment w outside access (each)$3,978.00 223 Cab step 2" larger mid and bottom $1,240.00 224 Handrail with LED Lighting per 2 $591.00 225 Cab Windows Factory Tint $389.00 226 Commercial step upgrade package $1,624.00 227 Upgrade Freightliner M2-106 to M2-112 $47,016.00 228 Upgrade 2 door to 4 door $12,812.00 229 Upgrade to extended cab $5,312.00 230 Upgrade Saber to Enforcer $11,238.00 231 Upgrade Enforcer to Impel $22,629.00 232 Upgrade Enforcer to Arrow $46,643.00 233 Upgrade Enforcer to Velocity $52,266.00 234 Upgrade Arrow to Velocity $18,316.00 235 Upgrade Arrow to Quantum $20,048.00 236 Velocity to Quantum $15,892.00 237 Remote Control Spot Lights $1,688.00 238 Spare 12 volt power (each)$178.00 239 12 volt Circuit block $326.00 240 12 volt USB Connection $255.00 241 Radio with Weatherband $1,655.00 242 Additional MUX Screen $3,263.00 243 Pierce Command Zone, Advanced Electronics & Control System, WiFi $9,149.00 244 Key Storage, Knox-Box $2,656.00 245 Install Customer Provided Hand light Charger(s)$139.00 246 Install Customer Provided Key Storage, Knox Box, in Cab $206.00 247 Install Customer Provided Modem $640.00 248 Install Customer Provided Thermal Camera(s), Charger Only $212.00 249 Install Customer Provided Two-Way Radio Remote Head Cable $348.00 250 install Customer MDT $1,188.00 251 Install Customer Antenna $99.00 252 Install Customer GPS $435.00 253 install Customer radio $1,079.00 254 install customer Knox $206.00 255 install customer drug vault $497.00 256 Install radio speakers $140.00 257 Install flashlights $140.00 258 Install Handheld chargers $209.00 259 Install Customer 12 volt battery charger $273.00 260 Medi-Kool mk18 $7,519.00 261 2 Person Command Center Configuration $19,107.00 262 Roll Alert System $4,451.00 263 Intercom System (BASIC)$2,854.00 264 Intercom System (up to 6 position)$4,819.00 265 Intercom Wireless System $6,400.00 266 Intercom Dual Radio $6,891.00 267 Intercom Headset - Wired $637.00 268 Intercom Headset - wireless $1,017.00 269 Intercom Headset Wireless $1,470.00 270 Camera System Rear only $1,619.00 271 Camera System, Sides and rear to mux $2,948.00 272 Camera System, Sides and rear to monitor $2,442.00 273 Camera, Tiller $3,148.00 274 Camera System with DVR $3,485.00 275 Camera System interior cab and exterior body $6,600.00 276 Camera Interior, forward, crew with DVR $10,376.00 277 Camera FLIR $25,640.00 278 Camera System Fotokite modem portable $46,735.00 279 Camera System Fotokite Compartment mounted $48,439.00 280 Camera System Fotokite w modem Compartment mounted $50,407.00 281 IOTA Charger $1,330.00 282 Blue Sea 40 amp $1,931.00 283 Dual Pro Charger $1,131.00 284 Kussmaul Charger $2,081.00 285 Kussmaul Pump plus $3,034.00 286 Progressive p2180 (per unit)$2,028.00 287 Newmar Charger $2,240.00 288 Auto-eject 15 amp $588.00 289 Auto-eject 20 amp $617.00 290 Auto-eject 30 amp $1,396.00 291 Battery Charger indication $328.00 292 Transfer switch $787.00 293 Sub Feed Box $452.00 294 Batteries 6 total $1,391.00 295 320 amp to 360 $2,888.00 296 320 Amp Leece Neville alternator $3,863.00 297 420 Amp Leece Neville alternator $4,847.00 298 430 Amp Niehoff alternator $6,312.00 299 430 amp Delco alternator $4,460.00 300 Mark 10 Load Manager $1,568.00 301 TSM Load Manager $2,129.00 302 LED Headlights $2,762.00 303 LED cab lighting $1,057.00 304 LED body perimeter additional $2,447.00 305 12 volt LED Scene - A $1,468.00 306 12 volt LED Scene - B $1,675.00 307 12 volt LED Scene - C $2,437.00 308 12 volt LED Flood Brow light A $2,251.00 309 12 volt LED Flood Brow light B $3,672.00 310 12 volt LED Flood Brow light C $3,985.00 311 12 volt LED Hi-Viz Brow A $1,985.00 312 12 volt LED Hi-Viz Brow B $2,520.00 313 12 volt LED Hi-Viz Brow C $7,341.00 314 12 volt LED Flood Recessed or surface (per light) A $2,458.00 315 12 volt LED Flood Recessed or surface (per light) B $3,662.00 316 12 volt LED Flood Recessed or surface (per light) C $5,746.00 317 12 volt LED Flood Pole light (per light)$2,869.00 318 Flood light switching (per unit)$146.00 319 Tail lighting LED Upgrade $1,881.00 320 Hose Bed Access Ladder $1,187.00 321 Hose Bed Cover, Aluminum $8,220.00 322 Hose Bed Cover, Vinyl $962.00 323 Hose Bed Cover, Roll-up $9,811.00 324 Add Vinyl Cover for Crosslay Hose Bed $532.00 325 Additional Hosebed Divider $609.00 326 NY Hose Bed $3,997.00 327 Upgrade NY Style Tank $2,716.00 328 Tail Board Upgrade Package $2,329.00 329 Rear step package with wrap bumper $3,670.00 330 PUC Body Configuration $14,897.00 331 Aerial body full depth per side $8,604.00 332 Pumper Body to Stainless $12,427.00 333 Aerial Aluminum to stainless body $19,121.00 334 Upgrade Body, HDRP $9,914.00 335 Long Pumper body $3,920.00 336 Tanker Hose bed Package $5,404.00 337 Tanker folding tank storage manual $3,954.00 338 Tanker folding tank storage electric $12,506.00 339 Upgrade Tanker Step Package $2,267.00 340 Flush back body option $1,878.00 341 Rear step package with wrap bumper $3,670.00 342 Compartment door locks (each) $86.00 343 PUC Flip-out steps $1,092.00 344 Black-out trim package $11,128.00 345 Drip Rail, Cab Roof $331.00 346 Running Board Trough $886.00 347 Running Board Trough Floating $1,204.00 348 Grip Strut $1,254.00 349 Traffic cone mount $648.00 350 Catwalk-Hatch Compartment, Each $4,031.00 351 Underbody Compartments, each $2,986.00 352 Add Right High Side Compartments $4,398.00 353 Add Electric / Hydraulic Ladder Rack $13,645.00 354 Ladder Storage next to tank $7,613.00 355 Ladder storage tank tunnel $10,105.00 356 Full Height - Depth Compartments $6,504.00 357 Ladder Top Access Storage $1,566.00 358 LED Compartment Lighting base upgrade lighting $2,377.00 359 LED Compartment Lighting premium $4,553.00 360 Increase Booster Tank to: 1000 Gallons $1,917.00 361 Increase Booster Tank to: 1250 Gallons $3,544.00 362 Increase Booster Tank to: 1500 Gallons $6,748.00 363 Increase Booster Tank to: 3000 Gallons $8,852.00 364 Fol-Da-Tank (per gallon)$167.00 365 2.5" Direct Tank Fill to Main Intake $6,733.00 366 Rear Direct tank fill electric $5,732.00 367 Outlet, Tank Fill, 2"$1,450.00 368 Direct Tank Fill Manual $3,744.00 369 manual rear dump with 90 $4,888.00 370 air-electric rear dump $5,947.00 371 air-electric side dump with extender (each)$9,464.00 372 trough - hard suction (each)$1,860.00 373 hard suction hose (each)$1,389.00 374 Soft Suction Hose $1,101.00 375 Mate Flex in Enclosed Compartments Per Shelf $138.00 376 Adjustable Comp. shelves $228.00 377 Adjustable transverse shelves $439.00 378 Fixed Compartment Shelves $369.00 379 Floor Tray $933.00 380 Floor tray flat-top multi slide $998.00 381 Slide-Master/OSS Slides $2,538.00 382 Adjustable slide-out tray $361.00 383 Tilt-out adjustable tray $827.00 384 Slide-out 1-way Utility $1,490.00 385 Slide-out 2-way Utility $1,847.00 386 Slide-out tool board $1,341.00 387 Slide-out tool board with PAC $2,256.00 388 Slide-out tool board in tray $1,307.00 389 Slide-out floor tray $901.00 390 Slide-out floor tray flat top $1,384.00 391 Floor tray 1-way Special. Depth $4,893.00 392 Swing-out tool board $1,307.00 393 Swing-out tool board (PAC)$1,992.00 394 Tool board in Slide-out tray $1,543.00 395 Tool board 2-way slide $2,402.00 396 Toll Board 2-waY w/ PAC $5,073.00 397 Tool board with peg $1,043.00 398 Tool board with Pac $1,992.00 399 Gear Grid $1,849.00 400 PacTrac in compartment $1,103.00 401 Peg Board in compartment $575.00 402 Compartment Partition $423.00 403 Hopper - Absorbent $1,979.00 404 HDR Floor Extension $431.00 405 C-Tech style drawers (per ea.)$1,528.00 406 Door pull strap (ea.)$138.00 407 Stokes Rack in hatch $1,304.00 408 SCBA Cylinder storage in fender panel single (each)$795.00 409 SCBA Cylinder storage in fender panel double (each)$1,281.00 410 SCBA Cylinder storage in fender panel triple (each)$1,525.00 411 SCBA Storage in fender panel $1,227.00 412 Extinguisher Compartment $929.00 413 SCBA Storage Bins (each)$183.00 414 Add Dura Surf (per each)$118.00 415 Electric Cord Reel Compartment $764.00 416 750 GPM Pump to 1000 GPM Pump $2,893.00 417 Upgrade Trans, Pump, Waterous, "PA" Series, Heavy Duty PTO $6,311.00 418 Increase Pump, 1000 GPM to 1250 GPM $3,224.00 419 Increase Pump from 1250 to 1500 gpm $6,925.00 420 Increase Pump from 1500 to 1750 gpm $2,285.00 421 Increase Pump from 1500 to 2000 gpm $4,476.00 422 add pump anodes (pair)$407.00 423 Add Mechanical Seal to Pump $1,007.00 424 Thermal Relief $1,287.00 425 MIV Valves Electric with manual back-up (each)$8,721.00 426 Manual Ball Intake Valve $2,996.00 427 add 2.5" suction inlet $1,661.00 428 Add Front Suction Inlet 4-6" $9,179.00 429 Add Rear Suction Inlet $7,458.00 430 1.5" discharge $2,536.00 431 2.5" Discharge $3,506.00 432 3" Discharge $3,004.00 433 Add Large Diameter Side Discharge $6,313.00 434 Add Large Diameter Rear Discharge $6,442.00 435 1.5" discharge front bumper $2,574.00 436 2.5" Discharge front bumper $3,193.00 437 Preconnect 1.5" with 2.0" plumbing - Speed or cross $3,611.00 438 Preconnect 2.5 or 3" plumbing - Speed or Cross $4,704.00 439 add electric valve deluge plumbing $6,686.00 440 Dual voltage water heater with tanker $5,725.00 441 Flow Meters, each $2,541.00 442 LED Backlite Gauges each $329.00 443 Electric deluge valve $4,153.00 444 Extenda-gun $7,256.00 445 Electric Extenda Gun $8,314.00 446 Deluge 6"$7,351.00 447 Electric Deluge with foam by-pass $10,174.00 448 Wireless remote monitor $12,836.00 449 Provide Speedlay Module $4,480.00 450 Provide (2) Speedlays w/ Tray $10,158.00 451 Add Hinged-Type Aluminum Cover to Crosslay (per set of 2)$841.00 452 Add 1" Cargo Netting to cross/speedlay (2)$494.00 453 Crosslay roll-up door enclosure $3,669.00 454 Poly Tray additional $678.00 455 Hose Reel, above pump w/ 150' Hose $4,204.00 456 Hose Reel, Under Cab w/ 100' Hose $5,069.00 457 Hose Reel in Compartment $6,642.00 458 Akron 3096-95 gpm Single Agent System $7,748.00 459 Akron 3096-95 gpm Dual Agent System $8,284.00 460 Discharge foam capable $666.00 461 Elkhart 240-95 Single Agent $6,700.00 462 Elkhart 240-95 Dual Agent $8,728.00 463 Foam Pro 1600 Single Agent $10,420.00 464 Foam Pro 2001 Dual Agent $14,821.00 465 Foam Pro 2002 Single Agent $21,056.00 466 Foam Pro 2002 Dual Agent $23,913.00 467 Pierce Husky 3, Single Agent $13,494.00 468 Pierce Husky 12 Single Agent $24,564.00 469 Pierce Husky 12 Dual Agent $28,456.00 470 Pierce Husky 160 Industrial Foam System $110,174.00 471 Pierce Husky 300 Industrial Foam System $136,667.00 472 Refill, Foam Tank, Dual Tank $2,145.00 473 Refill, Foam Tank, Single Tank $1,072.00 474 Foam Cell 20 Gallons $1,788.00 475 Foam Cell 25 Gallons $2,008.00 476 Foam Cell 30 Gallons $2,024.00 477 Foam Cell 40 Gallons $2,511.00 478 Foam Cell 50 Gallons $3,256.00 479 Foam system by-pass to deluge or aerial $5,693.00 480 Foam Cell 300 Gallons $4,581.00 481 Pierce Hercules CAFS to (5) Discharges $34,570.00 482 Hercules CAFS Compressor, Cover, w/Access Door $977.00 483 Pump Panel Enclosure $5,321.00 484 Cold Climate Pump Package $6,924.00 485 Airhorn at activation pump panel $214.00 486 Add Top Pump Control $9,472.00 487 Tank Level LED Group $1,536.00 488 Tank level LED (Individual lights)$3,189.00 489 Pump Light Shield/Step with LED $974.00 490 Speedometer, Class 1 w/LED $697.00 491 D-TEC $1,911.00 492 Will-Burt 7-30 Mast with Nycoil $15,029.00 493 Will-Burt 7-42 Mast with Nycoil $22,261.00 494 4 Channel Flash drive DVR $3,363.00 495 120 volt Body A/C, roof mounted with heat $2,855.00 496 120 volt Rescue Interior HVAC $8,288.00 497 2 person Command Center $18,771.00 498 Equipment Rack $4,952.00 499 Weather System $13,881.00 500 Interior Monitors $1,498.00 501 Satellite $11,590.00 502 Antenna Raceway $2,706.00 503 Haz-Mat Upgrade $26,885.00 504 LED Emergency Lighting A $8,599.00 505 LED Emergency Lighting B $12,646.00 506 LED Emergency Lighting C $15,175.00 507 Water Tank - Rescue $14,169.00 508 Communications Center, 2 Desk with Conference $268,903.00 509 LED Interior Lighting (8)$5,305.00 510 Tool Drawer(each)$2,890.00 511 Airbag Rack (each)$271.00 512 Rack, Plywood (10)$2,182.00 513 Under Body Compartment $4,262.00 514 Stokes Rack $1,704.00 515 120 v Refrigerator 23 cu ft.$3,015.00 516 Vertical Exhaust in Compartment $4,297.00 517 Slide-out Module up to 132" each $22,055.00 518 Leveling System $13,154.00 519 Awning $4,575.00 520 Electric Awning $7,942.00 521 Electric Awning Enclosed $10,143.00 522 Roof Rescue Eye (ea.)$1,372.00 523 Rescue Stairway $7,341.00 524 Quic-Ladder Access Ladder $2,437.00 525 Air Horns, 2 foot switches $593.00 526 Additional Speaker $753.00 527 Howler $1,493.00 528 Emitter in Lightbar - A $2,563.00 529 Emitter in Lightbar - B $5,669.00 530 Q2B $4,928.00 531 Q2B In grille $5,390.00 532 Chrome Bell with manual pull string $3,358.00 533 GTT Emitter Roof/remote mounted $6,536.00 534 Dominator style in grill $2,019.00 535 Roto Ray Emergency Light $3,233.00 536 Roto in grill $4,466.00 537 Mini Lightbar over crew cab Doors $6,951.00 538 3 Mini LED Light over each side cab door $4,624.00 539 Upgrade Lightbar - A $4,047.00 540 Upgrade Lightbar - B $8,296.00 541 Traffic Directing light bar "A"$1,751.00 542 Traffic Directing light bar "B"$3,890.00 543 Traffic Directing light bar "C"$8,130.00 544 Dual Traffic Advisor Lights $4,059.00 545 Inverter $3,436.00 546 Diesel 7.5 KW $17,365.00 547 Diesel 10 KW Generator w/ Monitor Package $23,015.00 548 Diesel 20 KW water cooled $26,937.00 549 Gas EM4000 $6,858.00 550 Gas 6500 KW $8,616.00 551 Hydraulic 3.6 kw $14,165.00 552 Hydraulic 6 KW $21,841.00 553 Hydraulic 8 KW $24,659.00 554 Hydraulic 10 KW $25,545.00 555 Hydraulic 15 KW $40,048.00 556 Hydraulic 30 KW $49,462.00 557 PTO Drive 15 KW $19,856.00 558 PTO Drive 25 kw $21,413.00 559 PTO Drive 35 kw $27,135.00 560 PTO Drive 40 Kw $30,062.00 561 120 Volt Tripod Flood Light $2,875.00 562 120 Volt Flood Light w/ pole $3,107.00 563 120 Volt Flood Light w/ pull-up pole $3,381.00 564 120 volt Flood Light - recessed $2,890.00 565 120 Volt Visor Light A $2,375.00 566 120 Volt Visor light B $2,859.00 567 120 volt LED w/ pole $3,190.00 568 120 volt LED recessed/flush mount $2,859.00 569 120 volt LED Pedestal $3,396.00 570 120 Volt LED w/ Folding Tripod $4,021.00 571 Lighting switch location (per switch)$170.00 572 Light Tower (A)$10,245.00 573 Light Tower (B)$15,791.00 574 Light Tower (3)$30,161.00 575 Light Tower 12 volt (A)$12,235.00 576 Light Tower 12 volt (b)$15,316.00 577 Light Tower 12 volt (C)$18,247.00 578 Electric Cord Reel with 200' of 10/3 $3,862.00 579 Electric Cord Reel with 200' of 10/3 in Front Bumper $4,443.00 580 Junction Box $964.00 581 Electrical Receptacle duplex (per each) 15 or 20 amp $403.00 582 Electrical Receptacle 30 amp (per each)$495.00 583 Receptacle 20 amp weatherproof $929.00 584 Cascade - A $13,392.00 585 Cascade - B $37,057.00 586 Breathing air compressor A $69,783.00 587 Breathing air compressor B $92,986.00 588 Breathing air booster pump $12,898.00 589 Breathing air fill-frag station $13,895.00 590 High Pressure Breathing Air Reel (200' hose)$4,049.00 591 Tool air reel with 150' hose $3,047.00 592 Hydraulic Reel, 100' x .25" Hose $5,531.00 593 Hydraulics package (2 reels with 100' hoses and 2 connector 12' hoses $15,564.00 594 Hannay reel with 100' Core Tech hose $9,110.00 595 Rescue Bulkhead fittings $2,169.00 596 DC Power to Tip $3,904.00 597 AC Power to Tip $7,715.00 598 Full Depth & Full Height Compartments - Aerials $7,365.00 599 Quick lock waterway $6,051.00 600 Waterway Shut-off valve $6,516.00 601 Provide Breathing Air to Tip $15,173.00 602 3-Way Intercom $4,939.00 603 Upgrade Aerial, 100AAT, Alum Body $87,004.00 604 Upgrade Aerial, 100'HAL 750# Tip Load to Ascendant 100' Aerial Tower $130,000.00 605 Increased Aerial weight/wind rating $6,900.00 606 Add PUC pump, tank and crosslay to Aerial $110,121.00 607 Provide Super Duty 100' Aerial Ladder, In Addition to Base Price $119,748.00 608 Pumper Style Body for Single Axle 75'-$9,935.00 609 Remote Tip Controls, Ladder $9,397.00 610 Aerial Control Wireless MUX Aerials $11,019.00 611 Lyfe Brackets 3 in 1 $1,979.00 612 LED Emergency Light Package Upgrade $12,239.00 613 Two (2) Monitors with Platforms $25,277.00 614 Extended travel Monitor $3,173.00 615 Single VUM Monitor Valve $2,940.00 616 2- VUM Manual Monitor Valves $6,678.00 617 Stokes Brackets behind Boom $1,048.00 618 Enclosed Stokes Box $2,561.00 619 Saw Box $983.00 620 Camera Stabilizer per pair $2,357.00 621 Collision Avoidance $10,076.00 622 Aerial warning lighting A $9,080.00 623 Aerial Warning Lighting B $12,512.00 624 Aerial Locator Lighting (ea.)$627.00 625 Aerial Graphics $5,020.00 626 LED Rung Lighting $7,553.00 627 High Flow Waterway upgrade $14,366.00 628 12 Volt LED Tracking/tip lights $5,164.00 629 Aerial Boom, controls, pedestal LED lighting $3,913.00 630 Aerial Accessories Upgrade $7,017.00 631 Two-tone cab paint $3,416.00 632 Two tone cab and body $4,185.00 633 Two-tone Lumicot $3,626.00 634 Three-tone paint $2,855.00 635 Compartment Night Spots $5,876.00 636 Undercoating, Cab & Body, Ziebart $2,488.00 637 E-Coat Under body Chassis $2,891.00 638 Corrosion Prevention Treatment, ECK, Dissimilar Metal $2,527.00 639 Painted Grill $1,760.00 640 Pump Panel Drawing $1,635.00 641 Compartment Layout $870.00 642 Cab, Seat Compartment Drawing $874.00 643 50' Snozzle - P-50 $210,600.00 644 65' Snozzle HS-2 65'$266,884.00 645 Graphics upgrade 1 $2,883.00 646 Graphics Upgrade 2 $4,275.00 647 Graphics Upgrade 3 $5,065.00 648 Graphics Upgraded 4 $9,341.00 649 Extended Chassis Warranty (per year)$5,657.00 650 Extended Body Warranty (per year)$7,983.00 651 Responder Lighting Package $6,070.00 652 Squad Package $8,549.00 653 Commander Package $10,967.00 654 Arrestor Package $13,380.00 655 Director Package $16,192.00 656 Lieutenant Package $23,843.00 657 Chief's Package $29,844.00 658 Executive Package $30,856.00 659 Whelen Lighting and parts (Red 19 or PL 19.1)43% off list 660 Havis (HS 6/19)32% off list 661 ProGard (ProGard 2019 Catalog)25% off list 662 Parts - 0$ off list 0% off list 663 Major P. M.$2,695.00 665 Aerial Maintenance $2,395.00 666 ARFF Unit Annual Inspection $1,942.00 667 ARFF Minor Service $2,821.00 668 ARFF Major Service $3,950.00 669 HRET Upgrade - Attack master 3 $22,546.00 670 HRET Upgrade - Attack master 4 $29,483.00 671 Foam System Maintenance Husky or similar (in shop)$500.00 672 Conductivity/Refractometer Foam Testing $834.00 673 CAFS Service $383.00 674 Annual Pump Test (in shop)$480.00 675 Quantum Step Maintenance $425.00 676 Wheels off brake inspection - Single $339.00 677 Wheels off brake inspection - Tandem $524.00 678 A/C System Service $987.00 679 Power steering Flush $672.00 680 TAK4 Inspection $649.00 681 Input Based Foam Testing Using No Foam System $1,706.00 682 Operational Dry Chemical Testing $636.00 683 Husky/CAFS/Foam Service $1,619.00 684 Aerial Testing $1,839.00 685 Labor Rate, per hour $156.00 686 Parts - 0$ off list $0.00 687 Each 150' Lengths of Utility Rope $297.00 688 150' life safety rope, at least 1/2" (12 mm) diameter meeting NFPA $326.00 689 150' Life Safety Rope, at least 5/8" (16 mm) diameter meeting NFPA $372.00 690 2.5 Gallon Water Extinguisher $188.00 691 Hose 1.75" x 50 Double Jacket with 1.50" couplings $269.00 692 Hose 2.50" x 50' Double Jacket with 2.50" Couplings $301.00 693 Hose 3.0" x 50' Double Jacket with 2.5" Couplings $349.00 694 4.00" x 100' Rubber Lined Hose $744.00 695 5.00" x 100' Rubber Lined Hose $819.00 696 Little Giant Ladder $738.00 697 Additional 10' Folding Ladder $594.00 698 12' Ladder $646.00 699 Additional 14' Roof with Hooks $779.00 700 16' Ladder $827.00 701 20' Ladder $899.00 702 24' Ladder $983.00 703 26' Ladder $1,441.00 704 28' Ladder $1,099.00 705 30' Ladder $1,675.00 706 35' Ladder $1,890.00 707 40' Ladder $2,173.00 708 45' Ladder $3,034.00 709 Rack, Ladders $3,854.00 710 Additional Pike Poles - A $506.00 711 Additional Pike Poles - B $1,012.00 712 Air Bags - 56 Ton System $9,322.00 713 Thermal Imager Camera with charger $17,173.00 714 Combination Spanner Wrench with Bracket $202.00 715 Complete SCBA $10,984.00 716 Deck Gun with Tips, Manual $5,397.00 717 Deck Gun with Tips, Electric $10,549.00 718 1.5" Nozzle with shut-off $1,750.00 719 2.5" Nozzle with shut-off $1,947.00 720 Portable Monitor 2.5" Inlet $6,907.00 721 Each Approved Portable Fire Extinguisher: ABC $243.00 722 Each Approved Portable Fire Extinguisher: CO2 $312.00 723 Each Hydrant Wrench Set $243.00 724 Each Portable Hand Light w/ Mounting Brackets $159.00 725 Each Scoop Shovel $115.00 726 First Aid Kit, 24 units, Fire Department Assortment $351.00 727 One Assorted Tool Box $612.00 728 One Hose Roller $448.00 729 One Pair of Bolt Cutters 24"$300.00 730 Cut-off Circular Saw $2,944.00 731 Chain Saw $2,501.00 732 Piston Intake $2,313.00 733 Rescue Tools - Power Unit, (2) Rams, Cutter, Spreader, Hoses $49,716.00 734 Silent Witness $1,594.00 735 Spare SCBA Bottles $1,734.00 736 Thermal Imager Camera System $36,538.00 737 Hose Clamp $668.00 738 Axe, Pick $159.00 739 Axe, Flat $154.00 740 PPV Fan, Gas $3,353.00 741 PPV Electric Fan $6,360.00 742 Poly mounts for tools, Rescue Equipment $1,429.00 743 380 Camera 8003040 $10,842.00 744 380 Camera 8003030 $12,826.00 745 Poly Console Box $2,144.00 746 Small poly console box $1,429.00 747 Pumper Custom Poly Mount Package $8,217.00 748 Aerial Custom Poly Mount Package $10,956.00 749 Rescue Custom Poly Mount Package $14,708.00 750 Engine Tunnel Custom Poly Console $1,905.00 751 Aluminum Custom Console $1,669.00 $0.00 100371 Paint Layout (Cab Split Color - Upper) $5,691.00 100536 Paint Layout (Cab Repaint) $8,722.00 100489 Bed Liner, Body/Step Surfaces $1,877.00 100520 Window Tint $553.00 100406 Severe Duty Chassis Upgrade Kit $16,663.00 100407 Heavy Duty Sway Bars $782.00 100408 Upgraded Differential Gears $5,053.00 100730 Air Locking Front Axle kit with compressor (Class 5 and Smaller Chassis) $4,378.00 100444 Bumper Extension, 24", Large Truck $1,432.00 203811 Bumper Platform, 24", Large Truck $1,936.00 100445 Bumper Platform, 12" $1,637.00 203810 Bumper Extension, 12", Up to Type 5 Apparatus $1,084.00 100446 Bumper Hose Compartment - Driver Side (Without Lid) $528.00 100447 Bumper Hose Compartment - Center (Without Lid) $528.00 100448 Bumper Hose Compartment - Passenger Side (Without Lid) $528.00 100625 Optima Batteries - Yellow Top $1,034.00 100046 Suspension System, FORD, 4x4, 6", 4 Link $11,886.00 203851 Suspension System FORD 6x6 Modification "FireWalker"$78,197.00 100603 Lift Kit, 4x4, 2" Spacer $1,552.00 100681 Suspension System, RAM, 4x4, 6" 4 Link $25,023.00 100683 Large Tire Modifications to Chassis $5,318.00 100048 Tires and Wheels, Super Single 335/80 R20 (4) $11,020.00 203743 Run Flat Insert, 11" 3 Piece Wheel (1) $518.00 100053 Spare Tire and Wheel, Super Single 335/80 R20 (1) $2,286.00 100054 Spare Tire and Wheel, Super Single 335/80 R20 (1) (No Trade In) $2,599.00 100055 Spare Tire, Top of Tank $313.00 100056 Spare Tire, Front of Tank $625.00 100059 Ranchhand Bumper Black Powder Coat Steel $2,899.00 100060 Ranchhand Bumper Steel (Custom Paint) $3,212.00 100061 Buckstop Bumper Steel (Custom Paint) $4,319.00 100062 Skeeter Aluminum Custom Bumper $4,306.00 100377 Custom Steel SBT HD Bumper and Grill Guard $4,440.00 100516 Custom Fabricated Bumper/Grill Guard $4,440.00 200310 Front Bumper Hose Securement System $216.00 203450 Skeeter Aluminum Custom Bumper, Painted BLACK $5,246.00 203452 Skeeter Aluminum Custom Bumper, Bed Lined BLACK $5,246.00 203451 Skeeter Aluminum Custom Bumper, Bed Lined RED $5,246.00 203449 Skeeter Aluminum Custom Bumper, Painted Chassis RED $5,246.00 100613 Bumper Mounted Grill Guard $1,191.00 100116 Rear Tube Bumper, 4"x8"x.25" $1,877.00 100610 Rear Tube Bumper, 4"x4"x.25" $1,527.00 100058 Mud Flaps, Rear Wheels, SBT Logo $409.00 100063 1/4" Skid Protection Panel $1,095.00 100064 Front Bumper, 5/16" Skid Protection Panel, Heavy Duty $1,443.00 100065 Transfer Case, Skid Protection Panel $1,672.00 100066 Exhaust DPF Canister, Protection, Tubular Steel $2,310.00 100586 DPF Skid Protection $324.00 100110 Cab Steps, Custom Painted, (2) Door Cab $1,156.00 100111 Cab Steps, Custom Painted, (4) Door or Extended Cab $1,215.00 100187 Custom Cab Protection/Steps 2 Door $2,345.00 100188 Custom Cab Protection/Steps Super Cab $2,551.00 100189 Custom Cab Protection/Steps 4 Door $2,743.00 100190 Cab Protection Bars, 2 Door $2,635.00 100191 Cab Protection Bars, Super Cab $2,888.00 100192 Cab Protection Bars, 4 Door $3,139.00 100193 Body Armor, Lower 60" ca $2,730.00 100412 Body Armor, Lower 84" ca $3,080.00 100414 Body Armor, Across Rear of Body $1,360.00 100413 Front Fender Armor $2,238.00 100085 Cab Console, Alum, Custom $1,371.00 100086 Cab Console, Poly, Custom $1,565.00 100543 Power Outlets 12V, Cigarette Lighter Type, Cab (3) $349.00 100087 Plastic, SCBA Storage in Cab (ify D/S or P/S) $1,732.00 100088 Plastic, EMS Storage in Cab (ify D/S or P/S) $1,396.00 100404 Plastic, SCBA & EMS Compartment Combination $3,297.00 100697 SCBA Seats, Cab $3,753.00 100075 Receiver, Front, Winch or Rope, 10,000# $434.00 100077 Winch Power Plugs, 12V, Quick Disconnect (2) Rear and Front $794.00 100078 Winch Power System, 12V, 400 amp Solenoid System $506.00 100662 Winch Wireless Control System, Warn $229.00 100079 Winch, Warn, #9.5cti, Portable Electric, 9,500# $2,923.00 100080 Winch, Warn, #M12000, Electric, Front Mount, 12,000# $3,249.00 100081 Winch, Warn, #M15000, Electric, Front Mount, 15,000# $3,513.00 100082 Winch, Warn, #M16ti, Electric, Front Mount, 16,500# $4,765.00 100083 Winch, Warn, #9.5cti, Fixed Mount Electric, 9,500# $2,622.00 100490 Winch, Super Winch, Talon 18.0, Electric, Front Mount, 18,000# $3,321.00 100512 Winch, Warn, Power Plant 9.5, 9,500# $2,960.00 100178 Receiver, Rear, Winch/Rope/Trailer, 10,000# $1,817.00 100240 Pump, Hale, Aux, Gas, HPX100-B18, B&S $8,517.00 100241 Pump, Hale, Aux, Gas, HPX100-B23, B&S $9,155.00 100243 Pump, Hale, Aux, Gas, HPX200-B18, B&S $7,363.00 100245 Pump, Hale, Aux, Gas, HPX300-B18, B&S $7,951.00 100546 Pump, Hale, Aux, Gas, HPX200-B23, B&S $9,010.00 100650 Pump, Hale, Aux, Gas, HPX75-B18, 18hp $8,759.00 100242 Pump, Hale, Aux, Diesel, HPX100-KBD 24 Kubota $20,199.00 100244 Pump, Hale, Aux, Diesel, HPX200-KBD 24 Kubota $20,079.00 100246 Pump, Hale, Aux, Diesel, HPX300-KBD 24 Kubota $20,933.00 100515 Pump, Hale, Aux, Diesel, FP300-DK-0 Kubota $35,994.00 100568 Pump, Hale, Midship PTO, Hale QFLO 1250 $63,363.00 100247 CAFS Pump, ROWE IND, Equalizer, NA40CAFS $40,013.00 100248 CAFS Pump, ROWE IND, Equalizer, NA40CAFS, Skid $52,584.00 100249 CAFS Pump, ROWE IND, Interface 1.5, (Module Only), Gas $64,231.00 100250 CAFS Pump, ROWE IND, Interface SC, Model DM 44, (Module Only), Diesel $84,741.00 100649 CAFS System, ROWE, Dsl Pump, PTO Compressor, (REQUIRES FOAM PRO 1601) $64,062.00 100432 Pump, CET, PFP-21HP-DSL-MR $18,684.00 100467 Pump, Darley 2.5 AGH Hydraulically Driven Pump $12,260.00 100550 Pump, Darley 2 BE 18V $7,627.00 100576 Pump, Darley 1.5 AGE, Diesel $23,796.00 100601 Pump, Darley, PTO Powered Module, HM 500 $29,306.00 100664 Pump, Darley LSP 750 Pump Module $73,216.00 100671 Pump Darley, 1.5 AGE 18V Gas $11,308.00 100672 Pump Darley, 1.5 AGE 13V Gas $9,925.00 100680 Pump Darley, 2.5 AGE 24K Diesel $25,059.00 203478 Pump, Darley PSP 1250 Pump Module $76,549.00 200316 Pump, Darley 23UHP-HV, Gas $47,375.00 200313 Pump Darley, HGE 35V, Gas $15,280.00 203475 Pump, Darley 2 BE23V $11,502.00 203812 Pump Darley, HE 42 K Diesel Pump Kubota $27,586.00 203815 Pump Darley 2 BE 21H Engine Mounted $8,073.00 100422 Pump, Wateraxe, B2X-23VX $9,179.00 100644 Pump, Wateraxe, BB4-18HX $7,879.00 100646 Pump, Wateraxe BB4-23-HX $9,384.00 100691 Pump, Wateraxe B2X-21-H $9,552.00 100596 Pump, Waterous, Aux, Diesel, E302-A $27,272.00 100729 CAFS Pump, Waterous, 100-50-OS $82,492.00 100728 Tempest MVU L125 Mobile Ventilation Unit $181,338.00 100466 Live-Drive Hydraulic Pump System $23,712.00 100669 PTO Unit, Clutch Type, Air or Electric, w/Shaft $3,875.00 100423 Thermal Relief Valve $252.00 100286 Valves, Akron, Brass, Quarter Turn $3,753.00 100263 Exhaust System, Vertical, Rain Cap, Aux Pump $313.00 100264 Exhaust System, Piped Under Body, Aux Pump $625.00 100307 Primer, Electric, Aux Pump, Additional or IPOS $2,008.00 100685 Primer, Hand, Guzzler $578.00 100266 Pump Enclosure - Diesel Pump $1,576.00 100265 Pump Control Panel Enclosure - Gas Pump $421.00 100420 Fire Pump Remote Start/Stop Control Cab $252.00 100419 Remote Pump Control in Cab (Diesel) $1,287.00 100418 Remote Pump Control in Cab (Gas) $2,105.00 100571 Remote Pump Control in Walkway $2,190.00 100670 Hose Reel, Hannay, Elec Rewind, Alum $3,200.00 100524 Hose Reel Rewind Controls $277.00 100302 Nozzle Mounting $72.00 100648 Hose, Water, 300#, 1" x 100' $686.00 100297 Hose, Water, 300#, 1" x 150' $818.00 100298 Hose, Water, 800#, 1" x 150' $987.00 100299 Hose, Water, 300#, 1" x 150', Reel-lite $1,178.00 100300 Hose, Water, 300#, 3/4" x 150' $770.00 100301 Hose, Water, 800#, 3/4" x 150' $1,203.00 100439 Hose, Water, 300#, 3/4" x 100' $650.00 100303 Roller, Hose Reel, Center $252.00 100304 Roller, Hose Reel, Captive, Four Sided $409.00 100386 Roller, Hose Reel, D/S Rear Corner $252.00 100280 Ground Sweep Discharges, Front Bumper $2,730.00 100279 Bumper Monitor, Akron, Forestry, Elec $9,840.00 100477 Bumper Monitor, Elkhart Sidewinder Monitor $14,280.00 100499 Bumper Monitor, Tornado $13,269.00 100657 Texana Quick Attack Manifold $35,983.00 100305 Whip Hose Lines, (2) Front Body 1" x 10', Booster Hose, 300#, w/cplgs $373.00 100374 Whip Hose Lines (2) Front Body 1" x 8', Booster Hose, 300#, w/cplgs $337.00 100385 Whip Hose Lines (2) Front Body 1" x 12', Booster Hose, 300#, w/cplgs $409.00 100259 Foam system, Scotty #4171, Through-the-pump, Built-in, Aux Pump $1,156.00 100260 Foam system, Waterous Foam Troll, Around-the-pump $18,768.00 100261 Foam System, FoamPro, 1601, Class A $10,358.00 100262 Foam System, Waterous, Aquis, 1.5, #2130053 $11,116.00 100424 Foam System, Trident, Foamate ATP 1.0 $1,264.00 100575 Foam System, FoamPro 2001, Class A/B $12,392.00 100700 Foam System, Trident 2.1, Class B $2,177.00 203813 Foam System, FoamPro 2002 Class A & B $14,702.00 100225 Water Tank Gauge, Class 1, Rear $1,046.00 100226 Water Tank Gauge, Class 1, Rear & Cab $1,565.00 100197 Water Tank Capacity, 250 Gallons, Poly $8,397.00 100198 Water Tank Capacity, 300 Gallons, Poly $8,938.00 100199 Water Tank Capacity, 350 Gallons, Poly $9,613.00 100200 Water Tank Capacity, 400 Gallons, Poly $9,853.00 100201 Water Tank Capacity, 450 Gallons, Poly $10,755.00 100202 Water Tank Capacity, 500 Gallons, Poly $11,670.00 100380 Water Tank Capacity, 750 Gallons, Poly $17,540.00 100563 Water Tank Capacity, 1000 Gallons, Poly $18,768.00 100564 Water Tank Capacity, 1500 Gallons, Poly $21,895.00 100565 Water Tank Capacity, 2000 Gallons, Poly $31,279.00 100591 Water Tank Capacity, 2500 Gallons, Poly $38,990.00 100614 Water Tank Capacity, 150 Gallons, Poly $7,254.00 100640 Water Tank Capacity, 1250 Gallons, Poly $20,018.00 100667 Water Tank Capacity, 200 Gallons, Poly $7,939.00 100526 Top of Tank Spare Tire Storage $770.00 100527 Spare Tire Mounting Assembly $384.00 100528 Quick Dump Valve $3,308.00 100660 Air Operated Quick Dump Valve $4,752.00 100223 Perimeter Wall Around Tank $625.00 100227 Foam Tank Capacity, 10 Gallons, Class A, Poly $1,251.00 100228 Foam Tank Capacity, 20 Gallons, Class A, Poly $1,443.00 100238 Foam Tank Gauge, Class 1, Class A, Rear $770.00 100239 Foam Tank Gauge, Class 1, Class A, Rear & Cab $1,287.00 203774 Burner 500 lbs Dry Powder Skid System $39,302.00 100118 Flat Bed Commercial, Steel, 112" x 94" $4,776.00 100119 Flat Bed Commercial, Steel, 136" x 94" $5,005.00 100112 Flat Bed Body, Alum 114" x 90", 60" CA $10,418.00 100113 Flat Bed Body, Alum, 138" x 96", 84" CA $12,175.00 100547 Flat Bed Body, Alum, 114" x 96", 60" CA $11,452.00 100552 Flat Bed Body, Alum, 138" x 100", 84 CA $11,574.00 100584 Flat Bed Body, Alum, 168" x 100" $15,014.00 100590 Flat Bed Body, Steel, 192" x 100" $22,521.00 203461 Flat Bed Body, Alum, 114" x 96", 60 CA Commercial Style $7,171.00 100117 Rescue Side, Alum, 138" x 96", 84" CA $16,830.00 100549 Rescue Side, Alum, 114" x 96", 60CA $14,593.00 100554 Rescue Side, Alum, 138" x 100", 84 CA $18,768.00 100608 Rescue Side, Alum, 168" x 100", 102CA $22,521.00 203776 Rescue Squad, Alum, 138" x 96", 84" CA, Full RSQ Side $40,038.00 203777 Rescue Squad, Alum, 114" x 96", 60" CA, Full RSQ Side $38,834.00 203798 Crosslay hose tray above transverse compartment $2,430.00 100114 Step Side Body, Alum, 114" x 96", 60" CA $12,404.00 100115 Step Side Body, Alum, 138" x 96", 84" CA $14,858.00 100548 Step Side Body, Alum, 114" x 96", 60CA $13,859.00 100553 Step Side Body, Alum, 138" x 100" 84 CA $17,517.00 100641 Step-Side Body, Alum, 168" x 100", 102 CA $18,768.00 100684 Rescue/Step Side, Alum, 114" x 96", 60CA $14,340.00 200307 Rescue/Step Side, Alum, 138" x 96", 84CA $15,615.00 203801 DA Finish Body and Compartments/Trays $1,660.00 203804 Painted Finish Body and Compartments/Trays $9,384.00 100126 Headache Rack Assembly, Tubing/Mesh, w/Lightbar Extension, A/L $506.00 100437 Transverse Compartment (Rescue) 24"W x 24"H x 96"L w/Doors $1,492.00 100462 Transverse Tool Storage Front of Tank Above $1,203.00 203817 TOP OF TANK STORAGE RACK $1,131.00 100463 Transverse Tool Storage Front of Tank $1,383.00 100464 Transverse Tool Storage Above Hose Tray $1,203.00 100457 Transverse Hose Bed, Front of Tank $1,156.00 100465 Transverse Hose Tray Slide Out $373.00 203465 Transverse Equipment Storage, Expanded Aluminum, Top of Transverse $1,156.00 100147 Compartment, Drop-Down Door $1,095.00 100148 Compartment, Lift-Up Door $1,131.00 100149 Compartment, Roll-Up Door $1,624.00 100544 Custom Compartment Shelf (1)$349.00 100556 Cmpt Under Frt Bdy, D/S, Chock 10"W x 24"H x 20"D, TFS $782.00 100617 Cmpt Under Hose Reel, Alum T/P, 24" W x 12" H x 22" D $1,131.00 100151 Cmpt Under Frt Bdy D/S, Alum T/P, 28"W x 15"H x 24"D, Vert Hinged Dr $1,095.00 100152 Cmpt Under Rear Bdy P/S, Alum T/P, 20"W x 15"H x 24"D, Vert Hngd Dr $1,095.00 100153 Cmpt Under Frt Bdy D/S & P/S, Alum T/P, 28"W x 15"H x 24"D, Vert Hngd Dr $2,190.00 100555 Cmpt Under Frt Bdy, D/S & P/S, Hose Reel, 36"W x 27"H x 24"D, TFS $1,877.00 100156 Cmpt Under Rear Bdy D/S, Alum T/P, 20"W x 15"H x 22"D,Vert Hngd Dr $1,143.00 100157 Cmpt Under Rear Bdy P/S, Alum T/P, 20"W x 15"H x 22"D, Vert Hngd Dr $1,143.00 100585 Cmpt Under Rear Bdy, D/S & P/S, Alum T/P, 20" W x 15"H x 22"D, Vert Hingd Dr $2,165.00 100642 Compartments, (2) Rear Body, Vertical, Rescue Style, 32" x 44", Swing Doors $3,344.00 203744 Compartments, (2) Rear Body, Vertical, Rescue Style, 32" x 44",Roll-Up Doors $4,632.00 100159 Rear Center Under Body Compt, 96"Dx33"Wx5"H, Drop Down Door $1,059.00 100166 Equipment Tray, Alum, 94"L, UHMW slide $384.00 100167 Equipment Tray, Poly, 94"L $565.00 100132 Tailboard, Bolt-On, Alum T/P, 8" $578.00 100133 Tailboard, Bolt-On, Alum T/P, 10" $613.00 100134 Tailboard, Bolt-On, Alum T/P, 12" $662.00 100160 Compartment Ventilation $132.00 100655 PAC Trac Mounting Extruded Panels $938.00 100656 Handle Lok Brackets, PAC-1004 $97.00 100161 Key Locks, Compartments, Hinged Doors $84.00 100540 Cab Lighting, LED $193.00 100162 Compartment Lights, Ceiling, Grote 61E41-3, 4" LED $409.00 100425 Compartment Lights, LED Strip Light $1,227.00 100459 Compartment Lights, Strip & Ceiling Combo $2,442.00 100715 Compartment Lights, (2) FRC FireFly, Ceiling, 2 5/8" LED $722.00 100720 Compartment Lights, LED Strip Light $1,059.00 100163 Compartment Light Door Switches, Automatic (2) $301.00 100164 Door Ajar Light, Flashing LED, Clear Lens $169.00 100542 Ceiling Fans, 12 Volt $469.00 100168 Hose Tray, Drivers Side, 64 in. long $1,275.00 100169 Hose Tray, Driver's Side, 72 in. long $1,527.00 203469 Lidless Expanded Aluminum Hose Tray, Driver's Side, 64 in. long $1,805.00 203466 Lidless Expanded Aluminum Hose Tray, Driver's Side, 72 in. long $2,069.00 203467 Expanded Aluminum Hose Tray, Driver's Side, 64 in. long $1,805.00 100632 Hose Tray, Drivers Side, 84 in. long $1,552.00 100452 Hose Tray, Drivers Side, 92 in. long $1,660.00 100538 Hose Tray, Drivers Side, 96 in. long $1,781.00 100171 Hose Tray, Passengers Side, 64 in. long $1,275.00 100172 Hose Tray, Passengers Side, 72 in. long $1,527.00 203471 Tool Tray, Driver Side, 72 in. long $1,805.00 203472 Lidless Expanded Aluminum Tool Tray, Passengers Side, 72 in. long $1,805.00 100176 Tool Tray, Passenger Side, 64 in. long $1,275.00 203468 Lidless Expanded Aluminum Tool Tray, Passenger Side, 64 in. long $1,805.00 100382 Tool Tray, Passenger Side, 72 in. long. $1,527.00 100631 Tool Tray, Passenger Side, 84 in. long. $1,552.00 100453 Tool Tray, Passenger Side, 92 in. long $1,660.00 100539 Tool Tray, Passenger Side, 96 in. long $1,781.00 203474 Lidless Expanded Aluminum Tool Tray, Passenger Side, 96 in. long $2,069.00 200317 I-Zone Brackets $686.00 100180 Rear Step, Pull out and drop down $733.00 100181 Step, Sig-4, Folding, Lighted, DS REAR(1) $277.00 100454 Recessed/Pocket Step Front Body $313.00 100545 Recessed/Pocket Step Rear of Body $313.00 100561 Interior Body Step $157.00 100692 Side Body Access Steps, Stirrup (2) $229.00 100693 Tank Access Step $157.00 100090 Battery Master Disconnect, 12V $446.00 100091 Battery Switch, Master Disconnect, CH, Rotary $421.00 100093 Kussmaul Auto Eject 091-55-20-120 20 amp, (ONLY AUTO EJECT) $638.00 100094 Battery Charger and Shore Power Plug, Kussmaul 1000 and Auto-Eject $1,227.00 100328 Clearance Lights, LED, DOT $578.00 100329 License Plate, Mount, Lighting $144.00 100096 Trailer Hitch Power Plug, 12V, 7 Prong $169.00 100097 Trailer Hitch Power Plug, Trailer Brake Electric Connection $204.00 100071 Ground Lights, Front Bumper, LED (2) Grote 61E41 $409.00 100072 Ground Lights, Front Bumper, LED (2) Grote 63831-5 $506.00 100073 Ground Lights, Cab, 2 Door, LED (2) Grote 61E41 $409.00 100074 Ground Lights, Cab, 4 Door, LED (4) Grote 61E41 $818.00 100622 Ground Lights, Cab, 2 Door, LED (2) Whelen 20C0CDCD $613.00 200312 Ground Lights, Cab, 4 Door Diesel Dodge, LED STRIPS $409.00 100502 Ground Lights, Under Cubicle Step, LED (2), Grote 61E41 $409.00 100182 Ground Lights, Under Rear Step, LED (2), Grote 61E41 $409.00 100183 Ground Lights, Under Rear Step, LED (2), Grote 63831-5 $506.00 100623 Ground Lights, Under Rear Body, LED (2), Whelen 20C0CDCD $613.00 100184 Work Lights, LED, (4), Grote #61E41 $613.00 100185 Ground Lights Upgrade , LED, (4), Grote #63831-5 $752.00 100480 Light Poles, Telescoping $1,818.00 100320 Scene Light, (2) Rigid Dually $746.00 100713 Scene Light, (2) FRC SoBrite $1,251.00 100383 Scene Light, (2) Rigid Dually $697.00 100434 Scene Light, Whelen M6ZC $3,526.00 100468 Scene Light, Whelen 70C0ELZR $2,851.00 100479 Scene Light, Whelen Par-36 $1,684.00 100626 Scene Light, Whelen SLP1BB $2,467.00 100323 Scene Light, Rigid Dually, Spot, Monitor $541.00 100410 Scene Light, Rigid 6" $1,275.00 100409 Scene Light, Whelen Pioneer, PFP2 $3,681.00 100433 Scene Light, Whelen Pioneer, PFP1 $2,154.00 100438 GPS Unit NUVI 57 LM $506.00 100107 Back-Up Camera, Rear View Safety, (1) camera $855.00 203457 FLIR KF6 System $20,380.00 100099 Radio, Fire, Installation, Purchaser Supplied $578.00 100620 Radio, Fire, Installation, Purchaser Supplied - Antennas Only $384.00 100102 Intercom System, Wireless Headset, Firecom, (2) $6,136.00 100103 Intercom System, Wireless Headset, Firecom, (4) $8,903.00 203168 Intercom System, Wireless Headset, Firecom, (3) $7,988.00 203169 Intercom System, Wireless Headset, Setcom (3) $8,301.00 100485 Intercom System, Wireless Headset, David Clark 9900 $6,701.00 203170 Intercom system, Sigtronics 3 person headset $5,161.00 100469 Flashlight Installation, Purchaser Supplied (2) $373.00 100324 Back Up Alarm, Buyers, #BA107 $157.00 100337 Stripe, Cab/Body, Single Reflective, 4" $541.00 100338 Stripe, Cab/Body, Triple Reflective, 1" x 4" x 1" $565.00 100341 Lettering, Keep Back "500 FEET" $409.00 100343 Stripe, Reflective, SCOTCHLITE, Chevron, Front Bumper, Alum Bumper $541.00 100345 Stripe, Reflective, SCOTCHLITE, Chevron, Rear $902.00 100348 Nozzle (1) TFT, DS1040BCP, 1", Bubble Cup, Grip Dual Gal, 10/40 $409.00 100384 Nozzles (1) TFT, DS1040P, 1", Ball Shut Off $384.00 100605 Wheel Chocks (Set of 2)$843.00 100350 Spanner Set, Kocheck, 2-Spanner / Hydrant, Mounted $241.00 100461 Spanner Set, Hydrant $265.00 100388 Suction Hose $493.00 100389 Barrel Suction Strainer $60.00 100421 SCBA Brackets $434.00 100435 Air Compressor, CKMTA12 $2,190.00 100450 Stainless Steel Ice Chest $434.00 100587 Water Cooler $277.00 203805 Drip Torch Holders (2) $373.00 SUPER DUTY CHASSIS UPGRADES $0.00 X5H SUPERCAB UPGRADE $3,482.00 W5H CREW CAB UPGADE $4,644.00 663A UPGRADE TO XLT PACKAGE $4,063.00 F4G DOWNGRADE TO F450 -$1,076.00 F5G UPGRADE TO F550 $1,162.00 W65 84" CA UPGRADE $198.00 W89 108" CA UPGRADE $436.00 W00 120" CA UPGRADED $668.00 99Y DOWGRADE TO 6.8L V-10 ENGINE -$6,135.00 99T UPGRADE TO 6.7L DIESEL $9,875.00 44W 6 SPEED AUTOMATIC TRANSMISSION [REG W/ DIESEL]$203.00 47A AMBULANCE PREP PACKAGE $1,569.00 47J FIRE/RESCUE PACKAGE $1,569.00 86S LOW DEFLECTION PACKAGE $99.00 52B ELEC BRAKE CONTROLLER $296.00 525 CRUISE CONTROL $296.00 585 AM/FM/CD $331.00 67A DUAL ALTERNATORS $441.00 62R PTO PROVISION $325.00 S2Z CHROME GRILLE FOR XL CHASSIS [ REG 17F XL DÉCOR ]$460.00 68R MANUAL REGENERATION $331.00 16S ALL WEATHER FLOOR MATS $87.00 166 CARPET DELETE -$43.00 18B MOLDED CAB STEPS $460.00 213 ELECTRONIC SHIFT ON FLY $320.00 39S SIRIUS SATELLITE RADIO $227.00 41P SKID PLATES $145.00 512 SPARE TIRE/ WHEEL $436.00 535 HI CAP TRAILER TOW $407.00 64D POLISHED ALUMINUM WHEELS $1,564.00 76C BACKUP ALARM $145.00 87D AMBER STROBE LIGHTS [4] - OEM $924.00 76S REMOTE START $262.00 945 STAINLESS STEEL WHEEL SIMULATORS $552.00 942 DAYTIME RUNNING LIGHTS $53.00 96V XL VALUE PACKAGE $692.00 90L POWER EQUIPMENT GROUP [ ON XL ]$1,273.00 18A UPFITTER INTERFACE MODULE $343.00 473 SNOW PLOW PREP $145.00 67A DUAL ALTERNATORS $460.00 91M SYNC $460.00 SCBA-O H.O. BOSTRUM OFFICER SCBA SEAT $1,273.00 SCBA-1 1 REAR H.O. BOSTRUM SCBA SEAT $1,273.00 SCBA-2 2 REAR H.O. BOSTRUM SCBE SEATS $2,319.00 SCBA-3 3 REAR H.O. BOSTRUM SCBA SEATS $3,365.00 SHPTHR SHIP THRU FREIGHT FOR NFPA EQUIPMENT $291.00 SP101 IAL ORDER PAINT FROM SPO PAINT CHART $808.00 F650 / F750 OPTIONS $0.00 176WB 176"WB/102"CA/70"AF/285"OAL $145.00 182WB 182" WB / 108" CA / 70" AF / 291" OAL $203.00 194WB 194"WB/120"CA/75"AF/308"OAL $378.00 200WB 200" WB / 126" CA / 75" AF / 314" OAL $569.00 212WB 212 " WB / 138" CA / 81" AF / 332" OAL $598.00 218WB 218" WB / 144" CA / 81" AF / 338" OAL $639.00 224WB 224" WB / 150" CA / 87" AF / 350" OAL $663.00 230WB 230"WB / 156" CA / 87" AF / 356" OAL $680.00 242WB 242" WB / 168" CA / 100" AF / 381" OAL $935.00 260WB 260" WB / 186" CA / 120" AF /419" OAL $1,121.00 281WB 281" WB / 207" CA / 120" AF / 440" OAL $1,337.00 X7F F750 SUPERCAB 4-DOOR UP CHARGE $3,365.00 W75 F750 CREW CAB 4-DOOR UP CHARGE $5,225.00 536 FRAME, SINGLE CHANNEL, STRAIGHT 'C' 14.18 SM / 120,000 PSI $424.00 539 FRAME, SINGLE CHANNEL, STRAIGHT 'C' 20.11 SM / 120,000 PSI $1,063.00 412 OUTER 'C' CHANNEL REINFORCEMENT, 29.84 SM / 120,000 PSI $1,349.00 18D 25,999 GVWR RATING $87.00 18G 33,000 LB DE-RATING $140.00 43P 12,000 LB DANA E-1202I FRONT AXLE $610.00 43E 14,000 LB DANA I-BEAM TYPE FRONT AXLE, I-1405 $1,487.00 61D 12,000 LB FRONT SPRINGS $610.00 61E 13,200 LB PARABOLIC TAPER LEAF FRONT SPRINGS $1,209.00 61F 14,000 LB PARABOLIC TAPER LEAF FRONT SPRINGS $1,487.00 15S FRONT STABILIZER BAR $569.00 532 FRONT FRAME EXTENSION 20"$569.00 765 CHROME PLATED FRONT BUMPER $569.00 86C CHROME GRILLE $285.00 60A LUBE FRONT AXLE, SYNTHETIC OIL, EMGARD 50W $58.00 91D SWITCHBACK EXHAUST WITH VERTICAL EXHAUST $639.00 69C 55 GALLON ALUMINUM FUEL TANK $354.00 65E 65 GALLON ALUMINUM FUEL TANK $494.00 65F 65L / 55R DUAL ALUMINUL FUEL TANKS $1,063.00 476 21,000 SINGLE REDUCTION LOCKING REAR AXLE $2,127.00 477 21,000 DUEAL REDUCTION AXLE $1,633.00 479 23,000 SINGLE REDUCTION AXLE $2,697.00 47P 23,000 SINGLE REDUCTION LOCKING REAR AXLE $2,441.00 47X 26,000 SINGLE REDUCTION REAR AXLE $2,842.00 52P DRIVE SHAFT UPGRADE $215.00 68R 23,000 LB MULTI LEAF SPRINGS W/ 2000 LB AUXILIARY $267.00 68T 31,000 LB MULTI LEAF SPRINGS W/ 2000 LB AUXILIARY $569.00 68B 21,000 LB REAR AIR SUSPENSION W/ SINGLE LEVELING VALVE $709.00 68F 23,000 LB REAR AIR SUSPENSION W/ SINGLE LEVELING VALVE $1,063.00 68Z AIR SUSPENSION DUMP VALVE $145.00 68Y AIR SUSPENSION LEVELING VALVE, DUAL HEIGHT $383.00 961 SHOCK ABSORBERS, REAR, DOUBLE ACTING $192.00 607 REAR AXLE LUBE, SYNTHETIC, EMGARD 75W-90 $116.00 184 PARKING BRAKE, BOSCH DSSA TYPE, 12X3, IP, SPRING ACTUATED $460.00 62F BRAKE CHAMBER SPRING RELOCATED $46.00 152 TRAILER CONN SOCKET, 7-WAY, WIRED FOR TURN AND STOP $116.00 154 TRAILER CONN SOCKET, 7-WAY, WIRED FOR TURN, NO STOP $116.00 158 TRAILER AIR BRAKE PACKAGE, 4 WHEEL $424.00 90P POWER EQUIPMENT GROUP [ ON XL ]$547.00 92S SLIDING REAR WINDOW $203.00 21D FORD SYNC $460.00 90C FORD TELEMANTICS $930.00 16V VOLTMETER $116.00 86K KEYLESS ENTRY $198.00 90E EXTERIOR APPEARANCE GROUP $848.00 59A AIR HORN $104.00 54F MIRRORS; POWER TRAILER TOW $460.00 19A AMBULANCE PREP PACKAGE $1,494.00 17M BACK UP ALARM, ELECTRIC, 101 dBA $128.00 59B BODY BUILDER IAL WIRING HARNESS $70.00 59C BODY BUILDER WIRING TO END OF FRAME $157.00 962 DAYTIME RUNNING LIGHTS $53.00 17A 220 AMP DENSCO SC6 HD ALTERNATOR $256.00 17D DUAL HD ALTERNATORS 357 AMP CAPACITY [ 200 AMP & 157 AMP ]$993.00 55M JUMP START STUD, REMOTE $104.00 63B [2] 900 CCA, 12V, MOTORCRAFT BATTERIES $70.00 63D [3] 900 CCA, 12V, MOTORCRAFT BATTERIES $291.00 63E [2] 625 CCA, 12V, MOTORCRAFT BATTERIES, TEMP MOUNTED #VALUE! 643 22 X 8.25 10 HOLE FRONT WHEELS $29.00 663 22 X 8.25 10 HOLE REAR WHEELS $58.00 TC3 MICHELIN 11R22.5H FRONT TIRES $482.00 TDG CONTINENTAL 295/60R22.5H FRONT TIRES $460.00 RC3 MICHELIN 11R22.5H REAR TIRES $482.00 RDG CONTINENTAL 295/60R22.5H REAR TIRES $460.00 88Y 40/20/40 SEAT $460.00 88J 30/0/30 AIR RIDE DRIVER AND PASSENGER $993.00 88G VINYL DRIVER AIR RIDE SEAT W/ INTEGRAL AIR PUMP $460.00 88R VINYL AIR RIDE DRIVER SEAT, W/ INTEGRAL AIR PUMP $511.00 925 SLIDING REAR WINDOW W/ PRIVACY GLASS $262.00 86B GRILLE, FIXED, DARK SHADOW GREY -$27.00 59A HORN, AIR - BLACK, SINGLE TRUMPET $58.00 58X RADIO DELETE -$54.00 644 WHEELS, FRONT 22.5 X 8.25, POLISHED ALUMINUM, 10 HOLE $692.00 664 WHEELS, REAR 22.5 X 8.25, POLISHED ALUMINUM, 10-HOLE $1,366.00 31P SHIP THRU PDI [FOR CHASSIS BEING DELIVERED TO BODY CO]$320.00 MARM1 4WD CONVERSION THROUGH MANNING $40,392.00 SP1O1 IAL ORDER PAINT FROM SPO PAINT CHART $3,482.00 FLR1 FLOOR PLAN INTEREST 18/Day ALL CHASSIS OPTIONS $0.00 SHOP1 WRITTEN SHOP MANUAL $436.00 SHOP2 ELECTRICAL WIRING DIAGRAM $343.00 SHOP3 EMISSIONS AND DIAGNOSTICS MANUAL $343.00 SHOP4 SHOP MANUAL ON DVD $460.00 SHOP5 PARTS DVD $460.00 KEY1 ADDITIONAL CHIP KEY WITH KEY FOB / INCL PROGRAMMING $576.00 DODGE CHASSIS OPTIONS $0.00 DPOL93 CREW CAB UPGRADE $4,417.00 27G UPGRADE TO SLT PACKAGE $3,894.00 DP9L63 DOWNGRADE TO 4500 -$1,184.00 ETK UGRADE TO CUMMINS 6.7 I-6 TURBO DIESEL ENGINE $8,538.00 DF3 ASIAN 6 SPEED AUTOMATIC $1,860.00 DPOL64 84" CA UPGRADE $232.00 DPOL65 108" CA UPGRADE $465.00 DPOL66 120" CA UPGRADE $697.00 WP4 19.5" POLISHED ALUMINUM WHEELS $1,273.00 BAJ 220 AMP ALTERNATOR $227.00 TUZ 225/70R19.5G All Traction Tires $291.00 NFA 22 GAL MIDSHIP FUEL TANK $145.00 DXJ 2 EXTRA KEYS $145.00 NLL DUAL FUEL TANKS 52 &22 GAL $808.00 AH2 AMBULANCE PREP PACKAGE $518.00 MRU BLACK TUBULAR CAB STEPS $460.00 MRT CHROME TUBULAR CAB STEPS $576.00 AMP CHROME APPEARANCE GROUP $343.00 MJB CHROME BODYSIDE MOLDING $116.00 MRT `CHROME TUBE STEPSD $407.00 ADE COLD WEATHER GROUP $169.00 LM1 DAYTIME RUNNING LIGHTS $58.00 ACL DOT ROADSIDE SAFETY KIT $174.00 XF5 DUAL ALTERNATORS - 380 AMP $460.00 XF7 DUAL ALTERNATORS - 440 AMPS $460.00 NHK ENGINE BLOCK HEATER $111.00 DK3 ELECT SHIFT- ON-THE- FLY TRANSFER CASE $343.00 XCL ENGINE SHUTDOWN TIMER $291.00 AH6 FIRE/EMERG/RESCUE IAL EMISSIONS PACKAGE $1,157.00 CKE FLOOR COVERING CARPET $174.00 LNJ FOG LAMPS $169.00 CLY FRONT RUBBER FLOOR MATS $111.00 TBB FULL SIZE SPARE TIRE AND WHEEL $407.00 AZB HEAVY DUTY FRONT SUSPENSION $145.00 AHD HEAVY DUTY SNOW PLOW PREP GROUP $285.00 LAY LED TAILLAMPS $111.00 LVP LOW VOL IAL PAINT $465.00 ADA LUXURY GROUP $663.00 AHQ MAX TRAILER TOW PKG $460.00 XAG PARKSENSE FT/RR PARK ASSIST SYSTEM $460.00 XAA PARKSENSE REAR PARK ASSIST SYSTEM $291.00 XAC PARKVIEW BACKUP CAMERA $460.00 AH5 PAYLOAD UPGRADE $564.00 AJW POWER ACCESSORY GROUP $726.00 XAP POWER ADJUSTABLE PEDALS $145.00 AJH POWER AND REMOTE ENTRY GROUP $988.00 LBN PTO PREP $343.00 LBV PTO PREP - LEFT SIDE $343.00 RCK PREMIUM SPEAKERS $343.00 GFD SLIDING REAR WINDOW $343.00 GFA REAR WINDOW DEFROSTER $186.00 CGQ RED SEAT BELTS $87.00 XBM REMOTE START $262.00 LSA SECURITY ALARM $192.00 RH1 SINGLE DISC CD $285.00 RSD SIRIUS SATELLITE RADIO $227.00 XHC TRAILER BRAKE CONTROL $343.00 XEF TRANSFER CASE SKID PLATE $111.00 UA1 UCONNECT 3.0 (BLUETOOTH)$227.00 RA2 UCONNECT 3 WITH 5" DISPLAY $767.00 RA3 UCONNECT 4C WITH 8.4" DISPLAY $1,244.00 RA4 UCONNECT 4C NAV WITH 8.4" DISPLAY $1,825.00 XXS UPFITTER ELECTRONIC MODULE (VSIM)$343.00 XF6 VOLTAGE MONITORTING AUTO IDLE UP $174.00 FLR1 FLOOR PLAN INTEREST PER DAY #VALUE! INTERNATIONAL CHASSIS OPTIONS $0.00 INT0001 Cummins L9- 300 hp/860 torque to Cummins L9 330 HP/1000 torque $1,308.00 INT0002 Front Tow Hooks $79.00 INT0003 Rear Tow Hooks $70.00 INT0004 Bolt on front frame extension $256.00 INT0005 Meritor MX-13/13K front axle to Meritor MX-14/14K front axle $686.00 INT0006 Bendix ABS with Traction Control +210.00 $244.00 INT0007 Frame: front 10.125” to 10.866” +532.00 $619.00 INT0008 Batteries: from 3/1950 CCA to 3/2775CCA +143.00 $166.00 INT0009 Alternator: from 160 amps to Brushless Delco Remy 240 amps +1022.00 $1,188.00 INT0010 Wheels: from 8.25 x 9.0 painted white to Polished Aluminum Front +394.00 $458.00 INT0011 Wheels: from 8.25 x 9.0 painted white to Polished aluminum rear +575.00 $668.00 INT0012 Tires: From Continental 12R22.5 16 ply HSR2 to Goodyear 315/80R22.5 16 ply Dura Seal G751 MS $4,504.00 INT0013 Crew Cab configuration with rear seat, seat belt warning for front and Rear seats, red seat belts for rear seat, plus other adjustments for fuel tank, Air dryer location, etc. $8,497.00 INT0014 Premium Red paint $465.00 FREIGHTLINER OPTIONS $0.00 FRT0001 Alternative Cab Seating Configuration, Crew Cab $1,342.00 FRT0002 Optional Crew Cab Aux HVAC System $4,615.00 FRT0003 Alternative Tire (385/65R22.5) FR, DUAL RR WHEEL $547.00 FRT0004 Alternative 4X4 Super-Single Drive Train, Wheels & Tires $7,207.00 FRT0005 Alternative 6X6 Super-Single Drive Train, Wheels & Tires $31,930.00 FRT0006 Alternative Cab Configuration, 132-IN BBC Extended Cab $3,173.00 FRT0007 Alternative Cab Configuration, 106-IN BBC Standard Cab $8,799.00 FRT0008 Alternative Cab Seating Configuration, Extended Cab $593.00