6379 - Steel Refuse Collection Containers, 3.Statement of Work/ SpecificationsEXHIBIT 3
TECHNICAL SPECIFICATIONS
The technical specifications shall be finalized upon the selection of the Firm. The proposal submission shall have accurately described your understanding of the objectives and scope
of the requested products and services and provided an outline of your process to implement the requirements of the scope of work and/or technical specification below. It is anticipated
that the scope proposal submission will include, at a minimum, the following:
FRONT LOAD SPECIFICATIONS
Proposers must state make and model number of the unit they are offering. Proposals submitted shall be on the latest current model of equipment meeting specifications and shall conform
to the latest American National Standards Z 245.1 – 1975 safety requirements for refuse collection and compaction equipment.
All containers and related equipment are to be cleaned of all weld splatter and slag, oil and excessive rust. Interior and exterior to be primed with (1) coat of High Solid Alkyd Rust
inhibitive Primer, or equal. Exterior to be painted with one (1) coat of H-I-S PAINT Alkyd Industrial Enamel. Emsco Green Code #90D32 or Dark Container Green 91D377-5. or equal). Recycle
containers to be to be primed and painted the same with the exception of color, use Safety Blue, or equal. If Purchase Order does not specify color, color should be Emsco Green or Dark
Container Green or Safety Blue or equal.
All sharp edges should be ground to prevent injury, welds should be smooth with no welding wire visible, and all seams and joints must be fitted correctly.
All containers shall have a metal plate attached to the item listing model #, serial #, manufacturer and date of manufacturing.
All equipment shall be marked for safety in operation according to American National Standard Specification and other regulations as applicable.
All items must be new and unused.
Technical Specifications for Proposal Item 1A – 4:
Front Load Containers Designed for McNeilus Lift Systems
Blunderbuss: 7 GA
Metal plate: listing model #, serial #, manufacturer & date of manufacturing
Upper sleeve gusset: 3/16”
Lower sleeve gusset: 3/16”
Drain: 1¼ weld flange
PVC drain plug
Lift sleeve: 3/16”
Hinge pin 5/8” HR RD, flat washer, 1/8” x 1” cotter pin
Hinge bracket: inside & outside: 7 GA
Lids .250 UV stabilized high molecular polyethylene made of new, non-recycled material
Container numbers to be painted left front top corner of container, no more than 2” from top edge and no more than 2” from left edge, using 2-2” letter and 4-2” numbers. Numbers to be
consecutive, FL3-0001, FL3-0002 etc.
Bottom channel: 10 GA (floor support)
Top framing for front, rear & side: 11 GA
Buff plate: 7 GA x 2” x 19” long
Front & rear sheet: 12 GA; bottom sheet: 10 GA
Floor support: 2, 3, 4 yd; 2 full length structural channel, skids with end caps
Floor support: 6 and 8 yd; 3 full length structural channel, skids with end caps
Door sheet: 16 GA, Door handle 3/16” x 1 F.L., Door track channel 3/16”
6 and 8 cubic yard to have right and left free slide metal doors 30” x 30”
Horizontal corrugations across front sheet of 6 and 8 yd
Dimensions (approximate): for further details see pages 12 – 18
All deliveries shall be scheduled (Date & Time) unless otherwise requested.
Size W D H
3 cu. yd. 72 45 49
4 cu. yd. 72 57 49
6 cu. yd. Slant 72 74 62
6 cu. yd. Lo profile 72 69 60
6 cu. yd. Hi profile 72 57 73
8 cu. yd. Lo Profile 72 74 77
8 cu. yd. Hi profile 72 69 81
8 cu. yd. Slant 72 76 72 rear/50 front
Containers to be welded solid on inside and be waterproofed up to the first opening (lid or side door).
Refuse container numbers to be painted on left front top corner of container, no more than 2” from top edge and no more than 2” from left edge, using 2-2” letters and 4-2” numbers.
Numbers to be consecutive, FL3-0001, FL3-0002 etc.
Recycling container numbers are to be painted on right front top corner of
container 3-2” letters and 3-2” numbers. Numbers to be consecutive RFS8-101, RFS8-102 etc.
FL3-0001 to be installed on 3 yd Front Load. FL3-0001, FL3-0002, FL3-0003 etc.
FL4-0001 to be installed on 4 yd Front Load. FL4-0001, FL4-0002, FL4-0003 etc.
FS6-0001 to be installed on 6 yd Slant. FS6-0001, FS6-0002, FS6-0003 etc.
FL6-0001 to be installed on 6 yd Lo Profile. FL6-0001, FL6-0002, FL6-0003 etc.
FH6-0001 to be installed on 6 yd Hi Profile. FH6-0001, FH6-0002, FH6-0003 etc.
FS8-0001 to be installed on 8 yd Slant FS8-0001, FS8-0002, FS8-0003 etc.
FL8-0001 to be installed on 8 yd Lo Profile FL8-0001, FL8-0002, FL8-0003 etc.
FH8-0001 to be installed on 8 yd Hi Profile FH8-0001, FH8-0002, FH8-0003 etc.
RFS6-0001 to be installed on 6 yd Slant.RFS6-0001, RFS6-0002, RFS6-0003 etc.
RFS8-0001 to be installed on 8 yd Slant RFS8-0001, RFS8-0002, RFS8-0003 etc