COD-2015-Residential-Energy-Compliance-Path-Plan-Review-Certificate
Rev. 4/28/17
Department of Development Services
Building Safety
City of Denton Texas 2015 IECC Residential
Energy Compliance Certificate Path
PROVIDE THIS FORM AT PERMIT SUBMITTAL
Permit Address: __________________________________________ Permit #: ____________
Testing Company:_________________________________________ Phone #: ____________
Testing Company:_________________________________________ Phone #: ____________
R401.2 – Projects shall comply with one of the following. All mandatory provisions apply:
Option 1A – Prescriptive: Sections R401 through R404:
R402 Building Thermal Envelope [Using table R402.1.2) Insulation and Fenestration requirements by component]
R403 Systems R404 Electrical Power and Lighting Systems (Mandatory)
Option 1B – Prescriptive Using REScheck UA Approach Only: Sections R401 through R404
R402 Building Thermal Envelope
R403 Systems R404 Electrical Power and Lighting Systems (Mandatory)
Option 2 – Performance Approach: Section R405
As-Built Report Required (Attach to final testing report)
Option 3 – ENERGY STAR Certified Home (attach certificate to final testing report)
Option 4 – Energy Rating Index Compliance Alternative: Section R406
Minimum envelope requirements > Table R402.1.1 or R402.1.3 –2015 IECC
Option 5 – ESL 4ACH Tradeoff Code Equivalency Compliance*
Envelope Component Option 5A Option 5B
Air Leakage <4ACH <4ACH
Wall Insulation Value** R13 + R3 R13 + R3
Fenestration U-factor < 0.32/0.25 < 0.32/0.25
Ceiling R-value < R49 < R49
Duct Insulation R8 R6
Radiant Barrier Required No Yes
*Except for the values listed in the table, all other mandatory code provisions are applicable.
**First value is cavity insulation, second is continuous insulation or insulated siding.
I certify that I have reviewed the construction documents including, but not necessarily limited to, insulation materials and R-values; fenestration U-factors
and SHGC values; area-weighted average U-factor and SHGC calculations; mechanical system design criteria; mechanical and service water heating system
and equipment types, sizes and efficiencies; equipment and systems controls; duct sealing, duct and piping insulation and location; and air sealing details;
and that the project as designed satisfies the minimum requirements for the compliance approach selected above.
Print Name: ______________________________________________ Certification Number: ____________________
Energy Rater/Preparer Company: ___________________________________________________________________
Signature of Energy Rater/Preparer: _______________________________________ Date: ____________________
ATTACH THE APPLICABLE COMPLIANCE REPORT