18-1234
%(+$1$%$1$-"$%.1,
181234
AdditionalFileExists
AdditionalFileContainsRecordsNotPublic,AccordingtothePublicRecordsAct
Other
%(+$Ș2ș#§º«(´¯º¯§²¹
FirstAmendmentɋOrdinanceNo.19209309/10/19JR
ORDINANCE NO. 18-1234
AN ORDINANCE OF THE CITY OF DENTON, TEXAS, A TEXAS HOME-RULE MUNICIPAL
CORPORATION, AUTHORIZING THE CITY MANAGER TO EXECUTE A PROFESSIONAL
SERVICES AGREEMENT WITH GARVER, LLC FOR DESIGN AND BID PHASE SERVICES
FOR THE LAKE LEWISVILLE WATER TREATMENT PLANT FILTER BACKWASH AND
SEDIMENTATION BASIN WASH-DOWN RESIDUALS DEWATERING FACILITY AS SET
FORTH IN THE AGREEMENT; PROVIDiNG FOR THE EXPENDITURE OF FUNDS
THEREFOR; AND PROVIDING AN EFFECTIVE DATE (RFQ 6590-025- PROFESSIONAL
SERVICES AGREEMENT FOR DESIGN AND BID PHASE SERVICES AWARDED TO
GARVER, LLC,1N THE NOT-TO-EXCEED AMOUNT OF $520,920).
WHEREAS, on March 6, 2018, the City Council approved a pre-qualified engineer list
(Ordinance 2018-331) and the professional services provider (the "Provider") mentioned in this
ordinance is being selected as the most highly qualified on the basis of its demonstrated competence
and qualifications to perform the proposed professional services; and
WHEREAS, the fees under the proposed contract are fair and reasonable and are consistent
with, and not higher than the recommended practices and fees published by the professional
associations applicable to the Provider's profession, and such fees do not exceed the maximum
provided by law; NOW, THEREFORE,
THE COUNCIL OF THE CITY OF DENTON HEREBY ORDAINS;
SECTION 1. The City Manager is hereby authorized to enter into a professional service
contract with Garver, LLC, to provide professional design and bid phase services for the Lake
Lewisville Water Treatment Plant filter backwash and sedimentation basin wash-down residuals
dewatering facility, a copy of which is attached hereto and incorporated by reference herein.
SECTION 2. The City Manager is authorized to expend funds as required by the attached
contract.
SEmm, CTION 3, The City Council of the City of Denton hereby expressly delegates the
.....................
authority to take any actions that may be required or permitted to be performed by the City of Denton
under the RFQ 6590-025 to the City Manager of the City of Denton, or his designee.
SECTION 4, The findings in the preamble of this ordinance are incorporated herein by
w.� � ................e�e�,...e.
reference.
SECTION 5. This ordinance shall become effective immediately upon its passage and
approval.
The ����������� to approve this ordinance was 7�������. ��ye� �"��'�� ��� R�"�� ���ti�� r�m��� �����r�c��c�1 ����
� ���i�: �'�t���i������tms�,��^ r^�� � ��1���.��`��� c1 �� � ti����°�.^�� �w°a 1���.� ii�N�a���v��'t �
�-----,�����-��- �����������"" . .. ........ � , � '� ,, . ' � �1�� � ,. �r �»
���t�, � �, _ _����
�-
Mayor Chris Watts:
Gerard Hudspeth, District 1:
Keely G. Briggs, District 2:
Don Duff, District 3:
John Ryan, District 4:
Deb Armintor, At Large Place 5:
Aye Nay
�
�
��
�
�
Paul Meltzer, At Large Place 6: "� �
PASSED AND APPROVED this the ���.��;
day of
ATTEST:
JENNIFER WALTERS, CITY SECRETARY
��'� � � � �
�'?
APPROVED AS TO LEGAL FORM:
AARON LEAL, CITY ATTORNEY
�
�,
�
BY: �� __ _ ����- �--- � _ ��� �� _ �_ ---------
Abstain
Absent
�
2018.
WATTS, MAYOR
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
5ƚĭǒƭźŭƓ /źƷǤ /ƚǒƓĭźƌ ƩğƓƭƒźƷƷğƌ /ƚǝĻƩƭŷĻĻƷ
CźƌĻ bğƒĻ
tǒƩĭŷğƭźƓŭ /ƚƓƷğĭƷ
/źƷǤ /ƚǒƓĭźƌ ğƩŭĻƷ 5ğƷĻ
/ƚƓƷƩğĭƷ ğƌǒĻ
tźŭŭǤ .ğĭƉ hƦƷźƚƓ
/ƚƓƷƩğĭƷ 9ǣƦźƩğƷźƚƓ
hƩķźƓğƓĭĻ
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
PROFESSIONAL SERVICES AGREEMENT
FOR ARCHITECT OR ENGINEER
FILE 6590-025
THIS AGREEMENT is made and entered into on ____________________________, by and
between the City of Denton, Texas, a Texas municipal corporation, with its principal office at 215 East
Garver, LLC,
with its corporate office at 3010 Gaylord Pkwy, Suite 190, Frisco, Texas 75034 hereinafter called
duly authorized representatives.
In consideration of the covenants and agreements herein contained, the parties hereto do mutually
agree as follows:
SECTION 1
EMPLOYMENT OF DESIGN PROFESSIONAL
The Owner hereby contracts with the Design Professional, a licensed Texas architect or
engineer, as an independent contractor. The Design Professional hereby agrees to perform the services
as described herein and in the Proposal, the General Conditions, and other attachments to this
Agreement that are referenced in Section 6, in connection with the Project. The Project shall include,
without limitation, design and bid phase services for the Lake Lewisville Water Treatment Plant filter
backwash and sedimentation basin wash-down residuals dewatering facility.
SECTION 2
COMPENSATION
The Owner shall compensate the Design Professional a total not to exceed of $520,920 as follows:
2.1 BASIC SERVICES
2.1.1 For Design Services the total compensation shall be $481,790.
2.1.2 For Bidding Services the total compensation shall be $39,130.
SECTION 3
INVOICES
Invoices shall be sent directly to the City of Denton Accounts Payable Department, 215 E McKinney
St, Denton, TX, 76201-4299. A pro-forma invoice shall be sent to the contract administrator as
identified in the Notice to Proceed. It is the intention of the City of Denton to make payment on
completed orders within thirty days after receipt of invoice or items; whichever is later, unless unusual
circumstances arise. Invoices must be fully documented as to labor, materials, and equipment
provided, if applicable, and must reference the City of Denton Purchase Order Number in order
to be processed. No payments shall be made on invoices not listing a Purchase Order Number.
Page 1
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
SECTION 4
CONTRACT TERM
The contract term shall become effective from date of award or notice to proceed as determined by the
City of Denton Purchasing Department. The contract shall remain effective until completion and
acceptance of the design project by an authorized representative of the Owner.
SECTION 5
Certificate of Interested Parties Electronic Filing
In 2015, the Texas Legislature adopted House Bill 1295, which added section 2252.908 of the
Government Code. The law states that the City may not enter into this contract unless the Contractor
submits a disclosure of interested parties (Form 1295) to the City at the time the Contractor submits the
signed contract. The Texas Ethics Commission has adopted rules requiring the business entity to file
Form 1295 electronically with the Commission.
Contractor will be required to furnish a Certificate of Interest Parties before the contract is
awarded, in accordance with Government Code 2252.908.
The contractor shall:
1. Log onto the State Ethics Commission Website at :
https://www.ethics.state.tx.us/whatsnew/elf_info_form1295.htm
2. Register utilizing the tutorial provided by the State
3. Print a copy of the completed Form 1295
4. Enter the Certificate Number on page 2 of this contract.
5. Complete and sign the Form 1295
6. Email the form to purchasing@cityofdenton.com with the contract number in the subject line.
(EX: Contract 1234 Form 1295)
The City must acknowledge the receipt of the filed Form 1295 not later than the 30th day after Council
website within seven business days.
SECTION 6
ENTIRE AGREEMENT
This Agreement includes this executed agreement and the following documents all of which are attached
hereto and made a part hereof by reference as if fully set forth herein:
Exhibit 1 - City of Denton General Conditions to Agreement for Architectural or Engineering
Services.
Exhibit 2 -
Exhibit 3 House Bill 89 Government Code 2270 Verification Form
Exhibit 4- Senate Bill 252 Government Code 2252 Certification Form
Page 2
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
The parties agree to transact business electronically. Any statutory requirements that certain terms be
in writing will be satisfied using electronic documents and signing. Electronic signing of this document
will be deemed an original for all legal purposes.
This Agreement is signed by the parties hereto effective as of the date first above written.
CITY OF DENTON
THIS AGREEMENT HAS BEEN
BOTH REVIEWED AND APPROVED
BY:__________________________
as to financial and operational
TODD HILEMAN
obligations and business terms.
CITY MANAGER
______________ ________________
SIGNATURE PRINTED NAME
_________________________________
TITLE
_________________________________
DEPARTMENT
ATTEST:
JENNIFER WALTERS, CITY SECRETARY
BY: __________________________________
APPROVED AS TO LEGAL FORM:
AARON LEAL, CITY ATTORNEY
BY: __________________________________
DESIGN FIRM
BY:__________________________
(Signature)
______________________________
TEXAS ETHICS COMMISSION
CERTIFICATE NUMBER
Page 3
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
CITY OF DENTON
GENERAL CONDITIONS
TO
AGREEMENT FOR ARCHITECTURAL OR ENGINEERING SERVICES
ARTICLE 1. ARCHITECT OR ENGINEER'S RESPONSIBILITIES
1.1 The Architect or Engineer's servicwhich these
or Design Professional's employees and consultants as
1.2 The Design Professional will perform all Services as an independent contractor to the prevailing professional standards consistent with the level of care and skill ordinarily
exercised by members of the same profession currently practicing in the same locality under similar conditions, including reasonable, informed judgments and prompt timely
essary for the orderly progress of the Project.
Upon request of the Owner, the Design Professional shall submit for the Owner's approval a schedule for the performance of the Services which may be adjusted as the Project
proceeds, and shall include allowances for periods of time required for the Owner's review and for approval of submissions by authorities having jurisdiction over the Project.
Time limits established by this schedule and approved by the Owner shall not, except for reasonable cause, be exceeded by the Design Professional or Owner, and any
adjustments to this schedule shall be mutually acceptable to both parties.
ARTICLE 2 SCOPE OF BASIC SERVICES
2.1 BASIC SERVICES DEFINED scribed in Sections 2.2 through 2.6 of these General Conditions and include
without limitation normal structural, civil, mechanical and electrical engineering services and any other engineering services necessary to produce a complete and accurate set of
Construction Documents, as described by and required in Section 2.4. The Basic Services may be modified by the Agreement.
2.2 SCHEMATIC DESIGN PHASE
2.2.1 The Design Professional, in consultation with the Owner, shall develop a written program for the Project to ascertain Owner's needs and to establish the
requirements for the Project.
2.2.2 The Design Professional shall provide a preliminary evaluation of the Owner's program, construction schedule and construction budget requirements, each in
terms of the other, subject to the limitations set forth in Subsection 5.2.1.
2.2.3 The Design Professional shall review with the Owner alternative approaches to design and construction of the Project.
2.2.4 Based on the mutually agreed-upon program, schedule and construction budget requirements, the Design Professional shall prepare, for approval by the Owner,
Schematic Design Documents consisting of drawings and other documents illustrating the scale and relationship of Project components. The Schematic Design shall
contemplate compliance with all applicable laws, statutes, ordinances, codes and regulations.
2.2.5 The Design Professional shall submit to the Owner a preliminary detailed estimate of Construction Cost based on current area, volume or other unit costs and
which indicates the cost of each category of work involved in constructing the Project and establishes an elapsed time factor for the period of time from the
commencement to the completion of construction.
2.3 DESIGN DEVELOPMENT PHASE
2.3.1 Based on the approved Schematic Design Documents and any adjustments authorized by the Owner in the program, schedule or construction budget, the Design
Professional shall prepare for approval by the Owner, Design Development Documents consisting of drawings and other documents to fix and describe the size and
character of the Project as to architectural, structural, mechanical and electrical systems, materials and such other elements as may be appropriate, which shall comply
with all applicable laws, statutes, ordinances, codes and regulations. Notwithstanding Owner's approval of the documents, Design Professional represents that the
Documents and specifications will be sufficient and adequate to fulfill the purposes of the Project.
2.3.2 The Design Professional shall advise the Owner of any adjustments to the preliminary estimate of Construction Cost in a further Detailed Statement as described
in Section 2.2.5.
2.4 CONSTRUCTION DOCUMENTS PHASE
2.4.1 Based on the approved Design Development Documents and any further adjustments in the scope or quality of the Project or in the construction budget
authorized by the Owner, the Design Professional shall prepare, for approval by the Owner, Construction Documents consisting of Drawings and Specifications setting
forth in detail requirements for the construction of the Project, which shall comply with all applicable laws, statutes, ordinances, codes and regulations.
2.4.2 The Design Professional shall assist the Owner in the preparation of the necessary bidding or procurement information, bidding or procurement forms, the
Conditions of the contract, and the form of Agreement between the Owner and contractor.
2.4.3 The Design Professional shall advise the Owner of any adjustments to previous preliminary estimates of Construction Cost indicated by changes in requirements
or general market conditions.
2.4.4 The Design Professional shall assist the Owner in connection with the Owner's responsibility for filing documents required for the approval of governmental
authorities having jurisdiction over the Project.
2.5 CONSTRUCTION CONTRACT PROCUREMENT
2.5.1 The Design Professional, following the Owner's approval of the Construction Documents and of the latest preliminary detailed estimate of Construction Cost,
shall assist the Owner in procuring a construction contract for the Project through any procurement method that is legally applicable to the Project including without
limitation, the competitive sealed bidding process. Although the Owner will consider the advice of the Design Professional, the award of the construction contract is in
the sole discretion of the Owner.
Page 4
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
2.5.2 If the construction contract amount for the Project exceeds the total construction cost of the Project as set forth in the approved Detailed Statement of Probable
Construction Costs of the Project submitted by the Design Professional, then the Design Professional, at its sole cost and expense, will revise the Construction
Documents as may be required by the Owner to reduce or modify the quantity or quality of the work so that the total construction cost of the Project will not exceed
the total construction cost set forth in the approved Detailed Statement of Probable Construction Costs.
2.6 CONSTRUCTION PHASE - ADMINISTRATION OF THE CONSTRUCTION CONTRACT
2.6.1 The Design Professional's responsibility to provide Basic Services for the Construction Phase under this Agreement commences with the award of the Contract
for Construction and terminates at the issuance to the Owner of the final Certificate for Payment, unless extended under the terms of Subsection 8.3.2.
2.6.2 The Design Professional shall provide detailed administration of the Contract for Construction as set forth below. For design professionals the administration
shall also be in accordance with AIA document A201, General Conditions of the Contract for Construction, current as of the date of the Agreement as may be
amended by the City of Denton special conditions, unless otherwise provided in the Agreement. For engineers the administration shall also be in accordance with the
Standard Specifications for Public Works Construction by the North Central Texas Council of Governments, current as of the date of the Agreement, unless otherwise
provided in the Agreement.
2.6.3 Construction Phase duties, responsibilities and limitations of authority of the Design Professional shall not be restricted, modified or extended without written
agreement of the Owner and Design Professional.
2.6.4 The Design Professional shall be a representative of and shall advise and consult with the Owner (1) during construction, and (2) at the Owner's direction from
time to time during the correction, or warranty period described in the Contract for Construction. The Design Professional shall have authority to act on behalf of the
Owner only to the extent provided in the Agreement and these General Conditions, unless otherwise modified by written instrument.
2.6.5 The Design Professional shall observe the construction site at least one time a week, while construction is in progress, and as reasonably necessary while
construction is not in progress, to become familiar with the progress and quality of the work completed and to determine if the work is being performed in a manner
indicating that the work when completed will be in accordance with the Contract Documents. Design Professional shall provide Owner a written report subsequent to
each on-site visit. On the basis of on-site observations the Design Professional shall keep the Owner informed of the progress and quality of the work, and shall
exercise the Degree of Care and diligence in discovering and promptly reporting to the Owner any observable defects or deficiencies in the work of Contractor or any
subcontractors. The Design Professional represents that he will follow Degree of Care in performing all Services under the Agreement. The Design Professional shall
promptly correct any defective designs or specifications furnished by the Design Professional at no cost to the Owner. The Owner's approval, acceptance, use of or
payment for all or any part of the Design Professional's Services hereunder or of the Project itself shall in no way alter the Design Professional's obligations or the
Owner's rights hereunder.
2.6.6 The Design Professional shall not have control over or charge of and shall not be responsible for construction means, methods, techniques, sequences or
procedures, or for safety precautions and programs in connection with the work. The Design Professional shall not be responsible for the Contractor's schedules or
failure to carry out the work in accordance with the Contract Documents except insofar as such failure may result from Design Professional's negligent acts or omis-
sions. The Design Professional shall not have control over or charge of acts or omissions of the Contractor, Subcontractors, or their agents or employees, or of any
other persons performing portions of the work.
2.6.7 The Design Professional shall at all times have access to the work wherever it is in preparation or progress.
2.6.8 Except as may otherwise be provided in the Contract Documents or when direct communications have been specially authorized, the Owner and Contractor
shall communicate through the Design Professional. Communications by and with the Design Professional's consultants shall be through the Design Professional.
2.6.9 Based on the Design Professional's observations at the site of the work and evaluations of the Contractor's Applications for Payment, the Design Professional
shall review and certify the amounts due the Contractor.
2.6.10 The Design Professional's certification for payment shall constitute a representation to the Owner, based on the Design Professional 's observations at the site as
provided in Subsection 2.6.5 and on the data comprising the Contractor's Application for Payment, that the work has progressed to the point indicated and that the
quality of the Work is in accordance with the Contract Documents. The foregoing representations are subject to minor deviations from the Contract Documents cor-
rectable prior to completion and to specific qualifications expressed by the Design Professional. The issuance of a Certificate for Payment shall further constitute a
representation that the Contractor is entitled to payment in the amount certified. However, the issuance of a Certificate for Payment shall not be a representation that
the Design Professional has (1) reviewed construction means, methods, techniques, sequences or procedures, or (2) ascertained how or for what purpose the Contractor
has used money previously paid on account of the Contract Sum.
2.6.11 The Design Professional shall have the responsibility and authority to reject work which does not conform to the Contract Documents. Whenever the Design
Professional considers it necessary or advisable for implementation of the intent of the Contract Documents, the Design Professional will have authority to require
additional inspection or testing of the work in accordance with the provisions of the Contract Documents, whether or not such Work is fabricated, installed or
completed. However, neither this authority of the Design Professional nor a decision made in good faith either to exercise or not exercise such authority shall give rise
to a duty or responsibility of the Design Professional to the Contractor, Subcontractors, material and equipment suppliers, their agents or employees or other persons
performing portions of the work.
2.6.12 The Design Professional shall review and approve or take other appropriate action upon Contractor's submittals such as Shop Drawings, Product Data and
Samples for the purpose of (1) determining compliance with applicable laws, statutes, ordinances and codes; and (2) determining whether or not the work, when
completed, will be in compliance with the requirements of the Contract Documents. The Design Professional shall act with such reasonable promptness to cause no
delay in the work or in the construction of the Owner or of separate contractors, while allowing sufficient time in the Design Professional's professional judgment to
permit adequate review. Review of such submittals is not conducted for the purpose of determining the accuracy and completeness of other details such as dimensions
and quantities or for substantiating instructions for installation or performance of equipment or systems designed by the Contractor, all of which remain the
responsibility of the Contractor to the extent required by the Contract Documents. The Design Professional's review shall not constitute approval of safety precautions
or, unless otherwise specifically stated by the Design Professional, of construction means, methods, techniques, sequences or procedures. The Design Professional's
approval of a specific item shall not indicate approval of an assembly of which the item is a component. When professional certification of performance characteristics
of materials, systems or equipment is required by the Contract Documents, the Design Professional shall be entitled to rely upon such certification to establish that the
materials, systems or equipment will meet the performance criteria required by the Contract Documents.
Page 5
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
2.6.13 The Design Professional shall prepare Change Orders and Construction Change Directives, with supporting documentation and data if deemed necessary by
the Design Professional as provided in Subsections 3.1.1 and 3.3.3, for the Owner's approval and execution in accordance with the Contract Documents, and may
authorize minor changes in the work not involving an adjustment in the Contract Sum or an extension of the Contract Time which are not inconsistent with the intent
of the Contract Documents.
2.6.14 On behalf of the Owner, the Design Professional shall conduct inspections to determine the dates of Substantial Completion and Final Completion, and if
requested by the Owner shall issue Certificates of Substantial and Final Completion. The Design Professional will receive and review written guarantees and related
documents required by the Contract for Construction to be assembled by the Contractor and shall issue a final certificate for Payment upon compliance with the
requirements of the Contract Documents.
2.6.15 The Design Professional shall interpret and provide recommendations on matters concerning performance of the Owner and Contractor under the requirements
of the Contract Documents on written request of either the Owner or Contractor. The Design Professional's response to such requests shall be made with reasonable
promptness and within any time limits agreed upon.
2.6.16 Interpretations and decisions of the Design Professional shall be consistent with the intent of and reasonably inferable from the Contract Documents and shall
be in writing or in the form of drawings. When making such interpretations and initial decisions, the Design Professional shall endeavor to secure faithful performance
by both Owner and Contractor, and shall not be liable for results or interpretations or decisions so rendered in good faith in accordance with all the provisions of this
Agreement and in the absence of negligence.
2.6.17 The Design Professional shall render written decisions within a reasonable time on all claims, disputes or other matters in question between the Owner and
Contractor relating to the execution or progress of the work as provided in the Contract Documents.
2.6.18 The Design Professional (1) shall render services under the Agreement in accordance with the Degree of Care; (2) will reimburse the Owner for all damages
caused by the defective designs the Design Professional prepares; and (3) by acknowledging payment by the Owner of any fees due, shall not be released from any
rights the Owner may have under the Agreement or diminish any of the Design Professional's obligations thereunder.
2.6.19 The Design Professional shall provide the Owner with four sets of reproducible prints showing all significant changes to the Construction Documents during
the Construction Phase.
ARTICLE 3 ADDITIONAL SERVICES
3.1 GENERAL
3.1.1 The services described in this Article 3 are not included in Basic Services unless so identified in the Agreement or Proposal, and they shall be paid for by the
Owner as provided in the Agreement, in addition to the compensation for Basic Services. The services described under Sections 3.2 and 3.4 shall only be provided if
authorized or confirmed in writing by the Owner. If services described under Contingent Additional Services in Section 3.3 are required due to circumstances beyond
the Design Professional's control, the Design Professional shall notify the Owner in writing and shall not commence such additional services until it receives written
approval from the Owner to proceed. If the Owner indicates in writing that all or part of such Contingent Additional Services are not required, the Design Professional
shall have no obligation to provide those services. Owner will be responsible for compensating the Design Professional for Contingent Additional Services only if
they are not required due to the negligence or fault of Design Professional.
3.2 PROJECT REPRESENTATION BEYOND BASIC SERVICES
3.2.1 If more extensive representation at the site than is described in Subsection 2.6.5 is required, the Design Professional shall provide one or more Project
Representatives to assist in carrying out such additional on-site responsibilities.
3.2.2 Project Representatives shall be selected, employed and directed by the Design Professional, and the Design Professional shall be compensated therefor as
agreed by the Owner and Design Professional.
3.3 CONTINGENT ADDITIONAL SERVICES
3.3.1 Making material revisions in Drawings, Specifications or other documents when such revisions are:
1. inconsistent with approvals or instructions previously given by the Owner, including revisions made necessary by adjustments in the Owner's
program or Project budget;
2. required by the enactment or revision of codes, laws or regulations subsequent to the preparation of such documents, or
3. due to changes required as a result of the Owner's failure to render decision in a timely manner.
3.3.2 Providing services required because of significant changes in the Project including, but not limited to, size, quality, complexity, or the Owner's schedule, except
for services required under Subsection 2.5.2.
3.3.3 Preparing Drawings, Specifications and other documentation and supporting data, and providing other services in connection with Change Orders and
Construction Change Directives.
3.3.4 Providing consultation concerning replacement of work damaged by fire or other cause during construction, and furnishing services required in connection with
the replacement of such work.
3.3.5 Providing services made necessary by the default of the Contractor, by major defects or deficiencies in the work of the Contractor, or by failure of performance
of either the Owner or Contractor under the Contract for Construction.
3.3.6 Providing services in evaluating an extensive number of claims submitted by the Contractor or others in connection with the work.
3.3.7 Providing services in connection with a public hearing, arbitration proceeding or legal proceeding except where the Design Professional is party thereto.
Page 6
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
3.3.8 Providing services in addition to those required by Article 2 for preparing documents for alternate, separate or sequential bids or providing services in connection
with bidding or construction prior to the completion of the Construction Documents Phase.
3.3.9 Notwithstanding anything contained in the Agreement, Proposal or these General Conditions to the contrary, all services described in this Article 3 that are
caused or necessitated in whole or in part due to the negligent act or omission of the Design Professional shall be performed by the Design Professional as a part of the
Basic Services under the Agreement with no additional compensation above and beyond the compensation due the Design Professional for the Basic Services. The
intervening or concurrent negligence of the Owner shall not limit the Design Profession
3.4 OPTIONAL ADDITIONAL SERVICES
3.4.1 Providing financial feasibility or other special studies.
3.4.2 Providing planning surveys, site evaluations or comparative studies of prospective sites.
3.4.3 Providing special surveys, environmental studies and submissions required for approvals of governmental authorities or others having jurisdiction over the
Project.
3.4.4 Providing services relative to future facilities, systems and equipment.
3.4.5 Providing services to investigate existing conditions or facilities or to make measured drawings thereof.
3.4.6 Providing services to verify the accuracy of drawings or other information furnished by the Owner.
3.4.7 Providing coordination of construction performed by separate contractors or by the Owner's own forces and coordination of services required in connection with
construction performed and equipment supplied by the Owner.
3.4.8 Providing detailed quantity surveys or inventories of material, equipment and labor.
3.4.9 Providing analyses of operating and maintenance costs.
3.4.10 Making investigations, inventories of materials or equipment, or valuations and detailed appraisals of existing facilities.
3.4.12 Providing assistance in the utilization of equipment or systems such as testing, adjusting and balancing, preparation of operation and maintenance manuals,
training personnel for operation and maintenance and consultation during operation.
3.4.13 Providing interior design and similar services required for or in connection with the selection, procurement or installation of furniture, furnishings and related
equipment.
3.4.14 Providing services other than as provided in Section 2.6.4, after issuance to the Owner of the final Certificate for Payment and expiration of the Warranty
period of the Contract for Construction.
3.4.15 Providing services of consultants for other than architectural, civil, structural, mechanical and electrical engineering portions of the Project provided as a part of
Basic Services.
3.4.16 Providing any other services not otherwise included in this Agreement or not customarily furnished in accordance with generally accepted architectural
practice.
3.4.17 Preparing a set of reproducible record drawings in addition to those required by Subsection 2.6.19, showing significant changes in the work made during con-
struction based on marked-up prints, drawings and other data furnished by the Contractor to the Design Professional.
3.4.18 Notwithstanding anything contained in the Agreement, Proposal or these General Conditions to the contrary, all services described in this Article 3 that are
caused or necessitated in whole or in part due to the negligent act or omission of the Design Professional shall be performed by the Design Professional as a part of the
Basic Services under the Agreement with no additional compensation above and beyond the compensation due the Design Professional for the Basic Services. The
intervening or concurrent negli
ARTICLE 4 OWNER'S RESPONSIBILITIES
4.1 The Owner shall consult with the Design Professional regarding requirements for the Project, including (1) the Owner's objectives, (2) schedule and design
constraints and criteria, including space requirements and relationships, flexibility, expendability, special equipment, systems and site requirements, as more speci-
fically described in Subsection 2.2.1.
4.2 The Owner shall establish and update an overall budget for the Project, including the Construction Cost, the Owner's other costs and reasonable contingencies
related to all of these costs.
4.3 If requested by the Design Professional, the Owner shall furnish evidence that financial arrangements have been made to fulfill the Owner's obligations under this
Agreement.
4.4 The Owner shall designate a representative authorized to act on the Owner's behalf with respect to the Project. The Owner or such authorized representative shall
render decisions in a timely manner pertaining to documents submitted by the Design Professional in order to avoid unreasonable delay in the orderly and sequential
progress of the Design Professional's services.
4.5 Where applicable, the Owner shall furnish surveys describing physical characteristics, legal limitations and utility locations for the site of the Project, and a written
legal description of the site. The surveys and legal information shall include, as applicable, grades and lines of streets, alleys, pavements and adjoining property and
Page 7
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
structures; adjacent drainage; rights-of-way, restrictions, easements, encroachments, zoning, deed restrictions, boundaries and contours of the site; locations,
dimensions and necessary data pertaining to existing buildings, other improvements and trees; and information concerning available utility services and lines, both
public and private, above and below grade, including inverts and depths. All the information on the survey shall be referenced to a project benchmark.
4.6 Where applicable, the Owner shall furnish the services of geotechnical engineers when such services are requested by the Design Professional. Such services may
include but are not limited to test borings, test pits, determinations of soil bearing values, percolation tests, evaluations of hazardous materials, ground corrosion and re-
sistivity tests, including necessary operations for anticipating sub-soil conditions, with reports and appropriate professional recommendations.
4.6.1 The Owner shall furnish the services of other consultants when such services are reasonably required by the scope of the Project and are requested by the Design
Professional and are not retained by the Design Professional as part of its Basic Services or Additional Services.
4.7 When not a part of the Additional Services, the Owner shall furnish structural, mechanical, chemical, air and water pollution tests, tests of hazardous materials,
and other laboratory and environmental tests, inspections and reports required by law or the Contract Documents.
4.8 The Owner shall furnish all legal, accounting and insurance counseling services as may be necessary at any time for the Project, including auditing services the
Owner may require to verify the Contractor's Applications for Payment or to ascertain how or for what purposes the Contractor has used the money paid by or on
behalf of the Owner.
4.9 The services, information, surveys and reports required by Owner under Sections 4.5 through 4.8 shall be furnished at the Owner's expense, and the Design
Professional shall be entitled to rely upon the accuracy and completeness thereof in the absence of any negligence on the part of the Design Professional.
4.10 The Owner shall give prompt written notice to the Design Professional if the Owner becomes aware of any fault or defect in the Project or nonconformance with
the Contract Documents.
4.11 Design Professional shall propose language for certificates or certifications to be requested of the Design Professional or Design Professional's consultants and
shall submit such to the Owner for review and approval at least fourteen (14) days prior to execution. The Owner agrees not to request certifications that would require
knowledge or services beyond the scope of the Agreement.
ARTICLE 5 CONSTRUCTION COST
5.1 CONSTRUCTION COST DEFINED
5.1.1 The Construction Cost shall be the total cost or estimated cost to the Owner of all elements of the Project designed or specified by the Design Professional.
5.1.2 The Construction Cost shall include the cost at current market rates of labor and materials furnished by the Owner and equipment designed, specified, selected or
specially provided for by the Design Professional, plus a reasonable allowance for the Contractor's overhead and profit. In addition, a reasonable allowance for con-
tingencies shall be included for market conditions at the time of bidding and for changes in the work during construction.
5.1.3 Construction Cost does not include the compensation of the Design Professional and Design Professional's consultants, the costs of the land, rights-of-way,
financing or other costs which are the responsibility of the Owner as provided in Article 4.
5.2 RESPONSIBILITY FOR CONSTRUCTION COST
5.2.1 Evaluations of the Owner's Project budget, preliminary estimates of Construction Cost and detailed estimates of Construction Cost prepared by the Design
Professional represent the Design Professional's best judgment as a design professional familiar with the construction industry. It is recognized, however, that neither
the Design Professional nor the Owner has control over the cost of labor, materials or equipment, over the Contractor's methods of determining bid prices, or over
competitive bidding or market conditions. Accordingly, the Design Professional cannot and does not warrant or represent that bids or cost proposals will not vary
from the Owner's Project budget or from any estimate of Construction Cost or evaluation prepared or agreed to by the Design Professional.
5.2.2 No fixed limit of Construction Cost shall be established as a condition of the Agreement by the furnishing, proposal or establishment of a Project budget, unless
such fixed limit has been agreed upon in writing and signed by the parties thereto. If such a fixed limit has been established, the Design Professional shall be permitted
to include contingencies for design, bidding and price escalation, to determine what materials, equipment, component systems and types of construction are to be
included in the Contract Documents, to make reasonable adjustments in the scope of the Project and to include in the Contract Documents alternate bids to adjust the
Construction Cost to the fixed limit. Fixed limits, if any, shall be increased in the amount of an increase in the Contract Sum occurring after execution of the Contract
for Construction.
5.2.3 If the Procurement Phase has not commenced within 90 days after the Design Professional submits the Construction Documents to the Owner, any Project
budget or fixed limit of Construction Cost shall be adjusted to reflect changes in the general level of prices in the construction industry between the date of submission
of the Construction Documents to the Owner and the date on which proposals are sought.
ARTICLE 6 OWNERSHIP AND USE OF DOCUMENTS
6.1 The Drawings, Specifications and other documents prepared by the Design Professional for this Project are instruments of the Design Professional's service and shall
become the property of the Owner upon termination or completion of the Agreement. The Design Professional is entitled to retain copies of all such documents. Such
documents are intended only be applicable to thi
Owner uses any of the information or materials developed pursuant to the Agreement in another project or for other purposes than are specified in the Agreement, the Design
Professional is released from any and all liability relating to their use in that project
6.2 Submission or distribution of documents to meet official regulatory requirements or for similar purposes in connection with the Project is not to be construed as publication
in derogation of the Design Professional's reserved rights.
ARTICLE 7 TERMINATION, SUSPENSION OR ABANDONMENT
Page 8
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
7.1 The Design Professional may terminate the Agreement upon not less than thirty days written notice should the Owner fail substantially to perform in accordance with the
terms of the Agreement through no fault of the Design Professional. Owner may terminate the Agreement or any phase thereof with or without cause upon thirty (30) days
prior written notice to the Design Professional. All work and labor being performed under the Agreement shall cease immediate
notice. Before the end of the thirty (30) day period, Design Professional shall invoice the Owner for all work it satisfactorily performed prior to the receipt of such notice. No
amount shall be due for lost or anticipated profits. All plans, field surveys, and other data related to the Project shall become property of the Owner upon termination of the
Agreement and shall be promptly delivered to the Owner in a reasonably organized form. Should Owner subsequently contract with a new Design Professional for continuation
of services on the Project, Design Professional shall cooperate in providing information.
7.2 If the Project is suspended by the Owner for more than 30 consecutive days, the Design Professional shall be compensated for services satisfactorily performed prior to
notice of such suspension. When the Project is resumed, the Design Professional's compensation shall be equitably adjusted to provide for expenses incurred in the interruption
and resumption of the Design Professional's services.
7.3 The Agreement may be terminated by the Owner upon not less than seven days written notice to the Design Professional in the event that the Project is permanently
abandoned. If the Project is abandoned by the Owner for more than 90 consecutive days, the Design Professional or the Owner may terminate the Agreement by giving written
notice.
7.4 Failure of the Owner to make payments to the Design Professional for work satisfactorily completed in accordance with the Agreement shall be considered substantial non-
performance and cause for termination.
7.5 If the Owner fails to make payment to Design Professional within thirty (30) days of receipt of a statement for services properly and satisfactorily performed, the Design
Professional may, upon seven days written notice to the Owner, suspend performance of services under the Agreement.
7.6 In the event of termination not the fault of the Design Professional, the Design Professional shall be compensated for services properly and satisfactorily performed prior to
termination.
ARTICLE 8 PAYMENTS TO THE DESIGN PROFESSIONAL
8.1 DIRECT PERSONNEL EXPENSE
8.1.1 Direct Personnel Expense is defined as the direct salaries of the Design Professional's personnel engaged on the Project and the portion of the cost of their
mandatory and customary contributions and benefits related thereto, such as employment taxes and other statutory employee benefits, insurance, sick leave, holidays,
vacations, pensions and similar contributions and benefits.
8.2 REIMBURSABLE EXPENSES
8.2.1 Reimbursable Expenses are in addition to compensation for Basic and Additional Services and include expenses incurred by the Design Professional and
Design Professional's employees and consultants in the interest of the Project, as identified in the following Clauses.
8.2.1.1 Expense of transportation in connection with the Project; expenses in connection with authorized out-of-town travel; long-distance communications;
and fees paid for securing approval of authorities having jurisdiction over the Project.
8.2.1.2 Expense of reproductions (except the reproduction of the sets of documents referenced in Subsection 2.6.19), postage and handling of Drawings,
Specifications and other documents.
8.2.1.3 If authorized in advance by the Owner, expense of overtime work requiring higher than regular rates.
8.2.1.4 Expense of renderings, models and mock-ups requested by the Owner.
8.2.1.5 Expense of computer-aided design and drafting equipment time when used in connection with the Project.
8.2.1.6 Other expenses that are approved in advance in writing by the Owner.
8.3 PAYMENTS ON ACCOUNT OF BASIC SERVICES
8.3.1 Payments for Basic Services shall be made monthly and, where applicable, shall be in proportion to services performed within each phase of service, on the
basis set forth in Section 2 of the Agreement and the schedule of work.
8.3.2 If and to the extent that the time initially established in the Agreement is exceeded or extended through no fault of the Design Professional, compensation for any
services rendered during the additional period of time shall be computed in the manner set forth in Section 2 of the Agreement.
8.3.3 When compensation is based on a percentage of Construction Cost and any portions of the Project are deleted or otherwise not constructed, compensation for
those portions of the Project shall be payable to the extent services are performed on those portions, in accordance with the schedule set forth in Section 2 of the
Agreement based on (1) the lowest bona fide bid or (2) if no such bid or proposal is received, the most recent preliminary estimate of Construction Cost or detailed
estimate of Construction Cost for such portions of the Project.
8.4 PAYMENTS ON ACCOUNT OF ADDITIONAL SERVICES
8.4.1 Payments on account of the Design Professional's Additional Services and for Reimbursable Expenses shall be made monthly within 30 days after the
presentation to the Owner of the Design Professional's statement of services rendered or expenses incurred.
8.5 PAYMENTS WITHHELD No deductions shall be made from the Design Professional's compensation on account of penalty, damages or other sums withheld from
payments to contractors, or on account of the cost of changes in the work other than those for which the Design Professional is responsible.
8.6 DESIGN PROFESSIONAL'S ACCOUNTING RECORDS Design Professional shall make available to Owner or Owner's authorized representative records of
Reimbursable Expenses and expenses pertaining to Additional Services and services performed on the basis of a multiple of Direct Personnel Expense for inspection and
Page 9
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
copying during regular business hours for three years after the date of the final Certificate of Payment, or until any litigation related to the Project is final, whichever date is
later.
ARTICLE 9 INDEMNITY
9.1 The Design Professional shall indemnify and save and hold harmless the Owner and its officers, agents, and employees from and against any and all liability,
claims, demands, damages, losses, and expenses, including, but not limited to court costs and reasonable attorney fees incurred by the Owner, and including, without
limitation, damages for bodily and personal injury, death and property damage, resulting from the negligent acts or omissions of the Design Professional or its officers,
shareholders, agents, or employees in the performance of the Agreement.
9.2 Nothing herein shall be construed to create a liability to any person who is not a party to the Agreement, and nothing herein
both at law or equity, to any claim, cause of action, or litigation filed by anyone not a party to the Agreement, including the defense of governmental immunity, which
defenses are hereby expressly reserved.
ARTICLE 10 INSURANCE During the performance of the Services under the Agreement, Design Professional shall maintain the following insurance with an
insurance company licensed or authorized to do business in the State of Texas by the State Insurance Commission or any successor agency that has a rating with Best
Rate Carriers of at least an A- or above:
10.1 Comprehensive General Liability Insurance with bodily injury limits of not less than $1,000,000 for each occurrence and not less than $2,000,000 in the aggregate,
and with property damage limits of not less than $100,000 for each occurrence and not less than $250,000 in the aggregate.
10.2 Automobile Liability Insurance with bodily injury limits of not less than $500,000 for each person and not less than $500,000 for each accident, and with property
damage limits of not less than $100,000 for each accident.
10.3 not less than $100,000 for each
accident including occupational disease.
10.4 Professional Liability Insurance with limits of not less than $1,000,000 annual aggregate.
10.5 The Design Professional shall furnish insurance certificates or insurance policies to the Owner evidencing insurance in compliance with this Article 10 at the time
of the execution of the Agreement. The General Liability and Automobile Liability insurance policies shall name the Owner as an addit
Compensation policy shall contain a waiver of subrogation in favor of the Owner, and each policy shall contain a provision that such insurance shall not be canceled or
onal shall, prior to the effective date of the
change or cancellation, furnish Owner with substitute certificates of insurance meeting the requirements of this Article 10.
ARTICLE 11 MISCELLANEOUS PROVISIONS
11.1 The Agreement shall be governed by the laws of the State of Texas. Venue of any suit or cause of action under the Agreement shall lie exclusively in Denton County,
Texas.
11.2 The Owner and Design Professional, respectively, bind themselves, their partners, successors, assigns and legal representatives to the other party to this Agreement and to
the partners, successors, assigns and legal representatives of such other party with respect to all covenants of this Agreement. The Design Professional shall not assign its
interests in the Agreement without the written consent of the Owner.
11.3 The term Agreement as used herein includes the executed Agreement, the Proposal, these General Conditions and other attachments referenced in Section 3 of the
Agreement which together represent the entire and integrated agreement between the Owner and Design Professional and supersedes all prior negotiations, representations or
agreements, either written or oral. The Agreement may be amended only by written instrument signed by both Owner and Design Professional. When interpreting the
Agreement the executed Agreement, Proposal, these General Conditions and the other attachments referenced in Section 3 of the Agreement shall to the extent that is
reasonably possible be read so as to harmonize the provisions. However, should the provisions of these documents be in conflict so that they can not be reasonably harmonized,
such documents shall be given priority in the following order:
1. The executed Agreement
2. Attachments referenced in Section 3 of the Agreement other than the Proposal
3. These General Provisions
4. The Proposal
11.4 Nothing contained in the Agreement shall create a contractual relationship with or a cause of action in favor of a third party against either the Owner or Design
Professional.
11.5 Upon receipt of prior written approval of Owner, the Design Professional shall have the right to include representations of the design of the Project, including photographs
of the extel's materials shall not include the Owner's
confidential or proprietary information if the Owner has previously advised the Design Professional in writing of the specific information considered by the Owner to be confi-
dential or proprietary. The Owner shall provide professional credit for the Design Professional on the construction sign and in the promotional materials for the Project.
11.6 Approval by the Owner shall not constitute, nor be deemed a release of the responsibility and liability of the Design Professional, its employees, associates, agents,
subcontractors, and subconsultants for the accuracy and competency of their designs or other work; nor shall such approval be deemed to be an assumption of such
responsibility by the Owner for any defect in the design or other work prepared by the Design Professional, its employees, subcontractors, agents, and consultants.
11.7 All notices, communications, and reports required or permitted under the Agreement shall be personally delivered or mailed to the respective parties by depositing
same in the United States mail to the address shown below signature block on the Agreement, certified mail, return receipt requested, unless otherwise specified herein.
All notices shall be deemed effective upon receipt by the party to whom such notice is given, or within three (3) days after mailing.
Page 10
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
11.8 If any provision of the Agreement is found or deemed by a court of competent jurisdiction to be invalid or unenforceable, it shall be considered severable from the
remainder of the Agreement and shall not cause the remainder to be invalid or unenforceable. In such event, the parties shall reform the Agreement to replace such
stricken provision with a valid and enforceable provision which comes as close as possible to expressing the intention of the stricken provision.
11.9 The Design Professional shall comply with all federal, state, and local laws, rules, regulations, and ordinances applicable to the work covered hereunder as they
may now read or hereinafter be amended during the term of this Agreement.
11.10 In performing the Services required hereunder, the Design Professional shall not discriminate against any person on the basis of race, color, religion, sex,
national origin or ancestry, age, or physical handicap.
11.11 The captions of the Agreement are for informational purposes only, and shall not in any way affect the substantive terms or conditions of the Agreement.
Page 11
C:\\ProgramData\\activePDF\\Temp\\DocConverter\\API\\Input\\$038fcefc14d0$F4B5392EB17544249B59D30B11F6B9DD.doc
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
SCOPE OF SERVICES
CITY OF DENTON
LAKE LEWISVILLE WATER TREATMENT PLANT DEWATERING IMPROVEMENTS
General
The scope of services for the City of Denton Lake Lewisville Water Treatment Plant (LLWTP) Dewatering
Improvements generally includes new facilities and equipment necessary for dewatering of residual solids
generated from filter backwash and sedimentation basin blowdown/washdown. The engineering services
include detailed design and construction services for installation of a gravity thickener, pump station, two
mechanical dewatering units, residuals conveyor, polymer systems, and a residual solids dewatering
building. Minor improvements to existing infrastructure such as isolation valving and drainage
improvements will also be included in the design. The design will evaluate the potential for continued use
of existing vertical turbine pumps in the Washwater Recovery Basin with increased flows from the
dewatering facility. The design of the dewatering facility will contain accommodations for future expansion.
The design package will also define construction sequencing requirements for maintenance of dewatering
operations during construction.
1. Dewatering Improvements Design
Design of the dewatering improvements includes the following:
1. Provide isolation valving on washwater recovery basin feed line downstream of MH 6.
2. Provide drainage improvements from adjacent parking lot to existing lagoon.
3. Replace and provide automation of valving for sedimentation basin blowdown/washdown to
the equalization basin.
4. Provide piping from the existing equalization basin submersible pumps to the gravity
thickener.
5. Provide a gravity thickener with a solids collection mechanism intended to store and thicken
solids prior to mechanical dewatering.
6. Provide a new variable speed positive displacement pump station for conveying thickened
solids to mechanical dewatering units, and for recirculating filtrate from the mechanical
dewatering unit to the existing Washwater Recovery Basin.
7. Provide two mechanical dewatering units within a new dewatering building to dewater
residual solids. The design will include polymer storage, feed equipment, and extension of
existing plant water system as required for equipment systems, facility cleaning, and gravity
thickener cleaning.
8. Provide dewatered sludge conveyance equipment to transfer sludge from the belt filter press
discharge to dumpster or truck loading area.
9. Provide roadway access improvements for dewatered solids transport trucks from discharge
of conveyor.
10. Provide HVAC and plumbing for dewatering building.
11. Evaluate automation including flow meters, mass meters, and automated valving and
controls.
12. Provision of power and signal integration into SCADA for applicable equipment.
13. Provide additional security measures such as fencing around the new dewatering facility,
key-card entry for the dewatering building, and cameras inside the dewatering building.
14. Develop appropriate construction sequencing for installation of the new equipment and
integration within the existing dewatering scheme.
15. Provide geotechnical services necessary for gravity thickener and dewatering building.
1.1 Project Management and Administration
Garver will perform planning activities to setup the project financials, schedule, tools and templates. A
project kick-off meeting will be held with the Owner to confirm project objectives, communications
Scope of Services 1 of 6 17088110
City of Denton LLWTP Dewatering Improvements
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
protocols, schedule milestones, deliverables, and administrative requirements. The kick-off meeting will
anager. This report shall
document overall progress, outstanding issues, decision logs, schedule status, major accomplishments
and milestones achieved, and significant concerns requiring Owner input.
Up to four progress meetings will be held as necessary with the Owner to review the project status,
discuss interim findings, discuss technical aspects, obtain deliverable review comments, review upcoming
activities, and provide schedule updates.
1.2 Geotechnical Report
GARVER shall contract with a sub-consultant to provide the following professional services as follows:
1. GARVER will propose boring locations.
2. GARVER will check with the OWNER and OWNER will verify underground utilities are not in
proximity to boring site.
3. Subcontract with a geotechnical company to drill up to 5 borings to 30 feet at the site. Samples
will be collected intermittently using continuous flight augers and either split-spoon or tube
samplers. For the deeper borings, shale may be sampled using an NX-size core barrel, or tested
in-situ using a Texas Department of Transportation Cone Penetration Test, as appropriate for the
material. At completion, the boreholes will be backfilled with auger cuttings to the ground surface.
4. Provide an engineer or geologist to direct the drilling, log the borings, record field test data, and
handle and transport the samples.
5. Prepare a TM or summary report of the geotechnical investigation to include:
a. Appendix with the boring locations, boring logs, laboratory test results, and a key to the
symbols used.
b. Discussion of subsurface conditions and soil properties indicated by the field and
laboratory work, and the implications for design.
c. Foundation and site preparation recommendations for the PROJECT. The intent is for
the proposed foundations to be compatible with the existing conditions.
1.3 Survey
GARVER will contract with a registered professional land surveyor to conduct a land survey at the
proposed PROJECT site. The survey will base horizontal and vertical control on the treatment plant
benchmark coordinates and datum. Survey measurements will be based on state plane coordinates.
Survey will be accomplished utilizing RTK GPS and Robotic Scanning Stations and will produce a
topographical survey of project area to map utilities and existing structures. The topographic survey will
include contours shown at one foot intervals, plotted locations of structures, paving, visible improvements,
and utility information based on surface evidence.
1.4 Preliminary (30%) Design
During the preliminary design phase, GARVER will work with the OWNER to deliver the preliminary design
of the proposed improvements and perform the services as described herein.
Based upon the agreed-to project concepts documented in the conceptual Evaluation of Dewatering
Alternatives, GARVER will prepare, for approval by the OWNER, a package of Preliminary Design
Documents for the proposed Dewatering Improvements. The Preliminary Design Documents will consist
of preliminary drawings. The preliminary design drawings will represent approximately 30 percent of the
final design documents. In addition to the preliminary design drawings, GARVER will develop and
evaluate criteria for dewatering equipment. These criteria will be used to compare and contrast up to
Scope of Services 2 of 6 17088110
City of Denton LLWTP Dewatering Improvements
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
three different vendors to supply one type of mechanical dewatering unit. The results of this comparison
will be presented in the Preliminary Design Review Workshop.
ct documents. The
preliminary design submittal will refine the project concepts and develop these concepts in further detail
for later use in preparing Contract Documents and final design documents for bidding and construction.
GARVER will conduct a Preliminary Design Review Workshop with the OWNER to present the
preliminary design. For the Preliminary Design Review Workshop, GARVER will lead and participate in joint
discussions with the OWNER which include these topics:
Review and refinement of preliminary layout.
Review and refinement of preliminary P&ID and preliminary selection of instrumentation.
Review of evaluated equipment criteria and determination for major equipment.
Review of proposed construction sequencing.
Review of Preliminary Design OPCC.
GARVER will begin detailed design after the OWNER provides written approval of a pre-selected vendor(s)
for the dewatering units.
1.5 Detailed (60, 90, and 100%) Design
During the detailed design phase of the project, GARVER will prepare construction plans and specifications
including final construction details and quantities, special provisions, and opinions of probable construction
cost. Throughout the detailed design phase, GARVER will:
1. Prepare Contract Documents that will consist of drawings and specifications that set forth
requirements for construction of the improvements, and shall include advertisement for bids,
instructions to bidders, bid forms, bond forms, and other information as required by the
OWNER to competitively bid the work. Standard contract forms including documents
supplied by Denton from the Engineers Joint Contract Documents Committee (EJCDC),
such as General Conditions and Supplemental Conditions as examples, will be used along
al specifications. As elements of the
Contract Documents preparation, GARVER will:
a. Prepare the 60% documents (plans, details, specifications, and opinion of probable
construction cost with 30 percent contingency) and submit three (3) sets to the OWNER
for review. Conduct a workshop with the OWNER to receive comments; OWNER
comments will be documented and incorporated into the subsequent submittal.
b. Prepare the 90% documents (plans, details, specifications, and opinion of probable
construction cost with 20 percent contingency) and submit three (3) sets to the OWNER
for review. Conduct a workshop with the OWNER to receive comments; OWNER
comments will be documented and incorporated into the subsequent submittal.
Concurrently, a set of 90% documents will be sent to TCEQ for review and approval.
c. Review and document OWNER comments for both the 60% documents and the 90%
documents. In turn, incorporate an agreed-to set of revisions into the design.
2. GARVER will evaluate potential construction sequencing and the overall approach to project
operation. Construction sequencing recommendations will set forth specific requirements for
the contractor and will be integrated into the Contract Documents.
3. GARVER will assist OWNER in submitting the design and Contract Documents for Texas
Commission of Environmental Quality (TCEQ) review and approval for construction. Submittal
VER will revise the Contract
Documents to pursue TCEQ approval.
4. Coordinate the review of drawings and specifications with the Texas Department of Licensing
and Regulation (TDLR). This includes transmitting the specifications and drawings and
technical memoranda, answering questions via telephone which may arise during the review
Scope of Services 3 of 6 17088110
City of Denton LLWTP Dewatering Improvements
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
process, and providing supplemental information to support the design.
1.6 Bidding Services
During the bidding phase of the project, GARVER will:
1. Prepare and submit Advertisement for Bids to OWNER for OWNER publication in newspaper(s).
The OWNER will pay advertising costs outside of this contract.
2.
room.
3. Support the contract documents by preparing and issuing addenda.
4. Participate in one pre-bid meeting.
5. Attend the bid opening.
6. Prepare bid tabulation.
7. Evaluate bids and recommend award.
8. Prepare conformed contract documents (i.e. integrate addenda items).
9. Prepare construction contracts.
1.7 Construction Administration
During the construction administration phase of the project, GARVER will:
1. Issue a Notice to Proceed letter to the Contractor.
2. Attend monthly progress/coordination meetings with the Contractor, through the anticipated
duration of construction (anticipated to be 12 months).
3. Review of Contractor Schedule and Payment Request:
a.
and progress schedules in accordance with this Agreement. The
schedule will be schedule constrained.
b. By recommending any payment, GARVER will not thereby be deemed to have
represented that continuous or exhaustive examinations have been made by GARVER
to check the quality or quantity of the work or to review the means, methods, sequences,
techniques, or procedures of construction or safety precautions or programs incident
thereto, or that GARVER has made an examination to ascertain how or for what purposes
the Construction Contractor has used the monies paid on account of the contract price,
or that title to any of the work, materials, or equipment has passed to the OWNER free
and clear of any lien, claims, security interests or encumbrances, or that the Construction
Contractor has completed his work exactly in accordance with the Construction Contract
Documents. The recommendations of payment will constitute a representation to the
OWNER that no substantial departure from the Construction Contract Documents or
requirements exists.
c. GARVER will als
schedule in accordance with the requirements of the Construction Contract Documents
and request that the Construction Contractor makes any necessary adjustments.
4. Evaluate and respond to a total of up to 150 construction material submittals and shop drawings.
If the submittals (including resubmittals) are more than the specified number they may be
considered Extra Work. Corrections or comments made by Garver on the shop drawings during
this review will not relieve Contractor from compliance with requirements of the drawings and
specifications. The check will only be for review of general conformance with the design concept
of the project and general compliance with the information given in the contract documents. The
Contractor will be responsible for confirming and correlating all quantities and dimensions,
selecting fabrication processes and techniques of construction, coordinating his work with that
of all other trades, and performing his
shall not constitute approval of safety precautions or constitute approval of construction means,
methods, techniques, sequences, procedures, or assembly of various components. When
certification of performance characteristics of materials, systems or equipment is required by the
Scope of Services 4 of 6 17088110
City of Denton LLWTP Dewatering Improvements
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
Contract Documents, either directly or implied for a complete and workable system, Garver shall
be entitled to rely upon such submittal or implied certification to establish that the materials,
systems or equipment will meet the performance criteria required by the Contract Documents.
5. Issue instructions to the Contractor on behalf of the OWNER and issue necessary clarifications
(respond to up to 75 RFIs) regarding the construction contract documents. If the RFIs are more
than the specified number they may be considered Extra Work.
6. Maintain a set of working drawings and prepare and furnish record drawings.
7. When authorized by the OWNER, prepare change orders for changes in the work from that
originally provided for in the construction contract documents. This scope assumes four change
orders.
8. Make an average of one visit to the project site each month concurrent with the construction
progress meetings to observe as an experienced and qualified design professional, the progress
and quality of the executed work of the Construction Contractor and to determine, in general, if
such work is proceeding in general accordance with the Construction Contract Documents.
ill be directed toward providing a greater degree of confidence for the
OWNER that the completed work of the Construction Contractor will conform to the Construction
Contract Documents, but this shall not relieve the Construction Contractor of responsibility for
performing the work in accordance with the Construction Contract Documents. A total of 12-one
day site visits are anticipated.
9. Participate in final project inspection, prepare punch list, and review final project closing
documents.
2. Project Deliverables
The following will be submitted to the OWNER, or others as indicated, by GARVER:
1. Electronic copies of meeting minutes for each design workshops
2. Kickoff meeting
3. Up to four (4) intermittent progress meetings throughout the course of the project
4. Geotechnical report (electronic file)
5. Preliminary Design Package (Three (3) hard copies and a set of electronic files)
6. Preliminary Design Workshop
7. Detailed Design Packages (Three (3) hard copies and a set of electronic files)
a. 60% Design
b. 90% Design
c. 100% Design
8. 60% Design Workshop
9. 90% Design Workshop
10. Bidding Packages
a. Bid Advertisement (Electronic file only)
b. Addenda (Electronic files only)
c. Conformed Documents (Three (3) hard copies and a set of electronic files)
d. Construction Contracts (Five (5) hard copies and a set of electronic files)
11. Construction Package
a. Record Drawings (Three (3) hard copies and a set of electronic files)
3. Extra Work
The following items are not included under this agreement but will be considered as extra work:
1. Redesign
direction and/or approval.
2. Funding assistance.
3. Deliverables in addition to those listed herein.
4. Meetings or workshops in addition to those listed herein.
5. Process testing or performance evaluation.
6. Evaluation of disposal alternatives.
Scope of Services 5 of 6 17088110
City of Denton LLWTP Dewatering Improvements
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
7. Additional evaluation of dewatering alternatives.
8. Pilot Testing.
9. Manufacturer site visits.
10. Environmental Handling and Documentation, including wetlands identification or mitigation plans
or other work related to environmentally or historically (culturally) significant items.
11. Services after construction, such as warranty follow-up, operations support, etc.
12. Training (to be provided by manufacturer).
13. On-Site Representation during construction.
14. Review of greater than 150 submittals.
15. Review of greater than 75 RFIs.
Extra Work will be as directed by the OWNER in writing for an additional fee as agreed upon by the OWNER
and GARVER.
4. Schedule
GARVER shall begin work under this Agreement within ten (10) days of a Notice to Proceed. GARVER
shall complete the work in accordance with the schedule below (based on calendar days):
Phase Description Calendar Days for Completion
Preliminary Design 90 days oceed
Detailed Design 180
Preliminary Design
Bidding Phase 45
Advertisement for Bid
Construction Phase 365
Notice to Proceed
Subsequent to the Notice to Proceed, the OWNER and the ENGINEER will schedule the following meetings
and workshops within the associated schedules for each project phase:
Phase Project Meeting and Workshop
Preliminary Design Preliminary Design Review Workshop
Detailed Design 60% Design Review Workshop
90% Design Review Workshop
Bidding Phase Pre-Bid Meeting
Bid Opening Meeting
Scope of Services 6 of 6 17088110
City of Denton LLWTP Dewatering Improvements
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
Exhibit
House Bill 89 - Government Code 2270
VERIFICATION
I, _______________________________________________, the undersigned
representative of ______________________________Company or Business name
(hereafter referred to as company), being an adult over the age of eighteen (18)
years of age, verify that the company named-above, under the provisions of
Subtitle F, Title 10, Government Code Chapter 2270:
1. Does not boycott Israel currently; and
2. Will not boycott Israel during the term of the contract the above-named
Company, business or individual with City of Denton.
Pursuant to Section 2270.001, Texas Government Code:
1.
with, or otherwise taking any action that is intended to penalize, inflict
economic harm on, or limit commercial relations specifically with Israel, or
with a person or entity doing business in Israel or in an Israeli-controlled
territory, but does not include an action made for ordinary business
purposes; and
2. -profit sole proprietorship, organization,
association, corporation, partnership, joint venture, limited partnership,
limited liability partnership, or any limited liability company, including a
wholly owned subsidiary, majority-owned subsidiary, parent company or
affiliate of those entities or business associations that exist to make a profit.
___________________________________
Name of Company Representative (Print)
________________________________
Signature of Company Representative
_________________________________
Date
DocuSign Envelope ID: 14B25994-4D68-4EB8-A56E-922C8F117ABA
Exhibit
Senate Bill 252 -Government Code 2252
CERTIFICATION
I, ______________________________________________, the undersigned
representative of ________________________________________________
(Company or business name) being an adult over the age of eighteen (18) years of
age, pursuant to Texas Government Code, Chapter 2252, Section 2252.152 and
Section 2252.153, certify that the company named above is not listed on the
website of the Comptroller of the State of Texas concerning the listing of
companies that are identified under Section 806.051, Section 807.051 or Section
2253.153. I further certify that should the above-named company enter into a
contract that is on said listing of companies on the website of the Comptroller of
the State of Texas which do business with Iran, Sudan or any Foreign Terrorist
Management Department.
___________________________________
Name of Company Representative (Print)
________________________________
Signature of Company Representative
_________________________________
Date
Certificate Of Completion
Envelope Id: 14B259944D684EB8A56E922C8F117ABAStatus: Completed
Subject: City Council Docusign Item - 6590-025 Lake Lewisville Dewatering Improvements Design
Source Envelope:
Document Pages: 23Signatures: 7Envelope Originator:
Certificate Pages: 6Initials: 0Jamie Cogdell
AutoNav: Enabled901B Texas Street
EnvelopeId Stamping: EnabledDenton, TX 76209
Time Zone: (UTC-06:00) Central Time (US & Canada)Jamie.Cogdell@cityofdenton.com
IP Address: 129.120.6.150
Record Tracking
Status: OriginalHolder: Jamie CogdellLocation: DocuSign
7/23/2018 10:42:32 AM Jamie.Cogdell@cityofdenton.com
Signer EventsSignatureTimestamp
Jamie CogdellSent: 7/23/2018 11:07:07 AM
Completed
jamie.cogdell@cityofdenton.comViewed: 7/23/2018 11:07:13 AM
Senior BuyerSigned: 7/23/2018 11:08:14 AM
Using IP Address: 129.120.6.150
City Of Denton
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Randall G. McIntyreSent: 7/23/2018 11:08:16 AM
rgmcintyre@garverusa.comViewed: 7/23/2018 11:14:30 AM
Garver, LLCSigned: 7/23/2018 11:20:39 AM
Security Level: Email, Account Authentication
Using IP Address: 96.95.254.29
(None)
Electronic Record and Signature Disclosure:
Accepted: 7/23/2018 11:14:30 AM
ID: 73d43ec9-f650-4fb7-876e-b9b90eba0924
Tim FisherSent: 7/23/2018 11:20:43 AM
tim.fisher@cityofdenton.comResent: 7/23/2018 4:51:45 PM
Director of Water UtilitiesViewed: 7/23/2018 4:53:47 PM
Security Level: Email, Account Authentication Signed: 7/23/2018 4:55:32 PM
Using IP Address: 129.120.6.150
(None)
Electronic Record and Signature Disclosure:
Accepted: 7/23/2018 4:53:47 PM
ID: 5de336ad-44d7-457f-a77e-0103f610f401
Mack ReinwandSent: 7/23/2018 4:55:35 PM
mack.reinwand@cityofdenton.comViewed: 7/31/2018 11:01:34 AM
City of DentonSigned: 8/9/2018 9:47:20 AM
Security Level: Email, Account Authentication
Signature Adoption: Pre-selected Style
(None)
Using IP Address: 129.120.6.150
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Signer EventsSignatureTimestamp
Tabitha MillsopSent: 8/9/2018 9:47:24 AM
Completed
tabitha.millsop@cityofdenton.comViewed: 8/22/2018 10:24:50 AM
City of DentonSigned: 8/22/2018 10:25:12 AM
Using IP Address: 129.120.6.150
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Todd HilemanSent: 8/22/2018 10:25:16 AM
todd.hileman@cityofdenton.comViewed: 8/22/2018 12:09:56 PM
City ManagerSigned: 8/22/2018 12:10:00 PM
City of Denton
Signature Adoption: Pre-selected Style
Security Level: Email, Account Authentication
Using IP Address: 129.120.6.150
(None)
Electronic Record and Signature Disclosure:
Accepted: 7/25/2017 11:02:14 AM
ID: 57619fbf-2aec-4b1f-805d-6bd7d9966f21
Jennifer WaltersSent: 8/22/2018 12:10:04 PM
jennifer.walters@cityofdenton.comViewed: 8/23/2018 12:44:54 PM
City SecretarySigned: 8/23/2018 12:47:06 PM
City of Denton
Signature Adoption: Pre-selected Style
Security Level: Email, Account Authentication
Using IP Address: 129.120.6.150
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
In Person Signer EventsSignatureTimestamp
Editor Delivery EventsStatusTimestamp
Agent Delivery EventsStatusTimestamp
Intermediary Delivery EventsStatusTimestamp
Certified Delivery EventsStatusTimestamp
Carbon Copy EventsStatusTimestamp
Sherri ThurmanSent: 7/23/2018 4:55:35 PM
sherri.thurman@cityofdenton.com
City of Denton
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Jane RichardsonSent: 8/22/2018 10:25:15 AM
jane.richardson@cityofdenton.comViewed: 8/22/2018 11:58:28 AM
Assistant City Secretary
City of Denton
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Carbon Copy EventsStatusTimestamp
Jennifer BridgesSent: 8/23/2018 12:47:09 PM
jennifer.bridges@cityofdenton.comViewed: 8/30/2018 2:52:27 PM
Procurement Assistant
City of Denton
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Jane RichardsonSent: 8/23/2018 12:47:10 PM
jane.richardson@cityofdenton.comViewed: 10/16/2018 2:16:50 PM
Assistant City Secretary
City of Denton
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Mamun YusufSent: 8/23/2018 12:47:11 PM
mamun.yusuf@cityofdenton.comViewed: 8/23/2018 1:07:16 PM
Senior Engineer
Security Level: Email, Account Authentication
(None)
Electronic Record and Signature Disclosure:
Not Offered via DocuSign
Notary EventsSignatureTimestamp
Envelope Summary EventsStatusTimestamps
Envelope SentHashed/Encrypted8/23/2018 12:47:11 PM
Certified DeliveredSecurity Checked8/23/2018 12:47:11 PM
Signing CompleteSecurity Checked8/23/2018 12:47:11 PM
CompletedSecurity Checked8/23/2018 12:47:11 PM
Payment EventsStatusTimestamps
Electronic Record and Signature Disclosure
ELECTRONIC RECORD AND SIGNATURE DISCLOSURE
From time to time, City of Denton (we, us or Company) may be required by law to provide to
you certain written notices or disclosures. Described below are the terms and conditions for
providing to you such notices and disclosures electronically through your DocuSign, Inc.
(DocuSign) Express user account. Please read the information below carefully and thoroughly,
and if you can access this information electronically to your satisfaction and agree to these terms
and conditions, please confirm your agreement by clicking the 'I agree' button at the bottom of
this document.
Getting paper copies
At any time, you may request from us a paper copy of any record provided or made available
electronically to you by us. For such copies, as long as you are an authorized user of the
DocuSign system you will have the ability to download and print any documents we send to you
through your DocuSign user account for a limited period of time (usually 30 days) after such
documents are first sent to you. After such time, if you wish for us to send you paper copies of
any such documents from our office to you, you will be charged a $0.00 per-page fee. You may
request delivery of such paper copies from us by following the procedure described below.
Withdrawing your consent
If you decide to receive notices and disclosures from us electronically, you may at any time
change your mind and tell us that thereafter you want to receive required notices and disclosures
only in paper format. How you must inform us of your decision to receive future notices and
disclosure in paper format and withdraw your consent to receive notices and disclosures
electronically is described below.
Consequences of changing your mind
If you elect to receive required notices and disclosures only in paper format, it will slow the
speed at which we can complete certain steps in transactions with you and delivering services to
you because we will need first to send the required notices or disclosures to you in paper format,
and then wait until we receive back from you your acknowledgment of your receipt of such
paper notices or disclosures. To indicate to us that you are changing your mind, you must
withdraw your consent using the DocuSign 'Withdraw Consent' form on the signing page of your
DocuSign account. This will indicate to us that you have withdrawn your consent to receive
required notices and disclosures electronically from us and you will no longer be able to use your
DocuSign Express user account to receive required notices and consents electronically from us
or to sign electronically documents from us.
All notices and disclosures will be sent to you electronically
Unless you tell us otherwise in accordance with the procedures described herein, we will provide
electronically to you through your DocuSign user account all required notices, disclosures,
authorizations, acknowledgements, and other documents that are required to be provided or
made available to you during the course of our relationship with you. To reduce the chance of
you inadvertently not receiving any notice or disclosure, we prefer to provide all of the required
notices and disclosures to you by the same method and to the same address that you have given
us. Thus, you can receive all the disclosures and notices electronically or in paper format through
the paper mail delivery system. If you do not agree with this process, please let us know as
described below. Please also see the paragraph immediately above that describes the
consequences of your electing not to receive delivery of the notices and disclosures
electronically from us.
How to contact City of Denton:
You may contact us to let us know of your changes as to how we may contact you electronically,
to request paper copies of certain information from us, and to withdraw your prior consent to
receive notices and disclosures electronically as follows:
To contact us by email send messages to: purchasing@cityofdenton.com
To advise City of Denton of your new e-mail address
To let us know of a change in your e-mail address where we should send notices and disclosures
electronically to you, you must send an email message to us at melissa.kraft@cityofdenton.com
and in the body of such request you must state: your previous e-mail address, your new e-mail
address. We do not require any other information from you to change your email address..
In addition, you must notify DocuSign, Inc to arrange for your new email address to be reflected
in your DocuSign account by following the process for changing e-mail in DocuSign.
To request paper copies from City of Denton
To request delivery from us of paper copies of the notices and disclosures previously provided
by us to you electronically, you must send us an e-mail to purchasing@cityofdenton.com and in
the body of such request you must state your e-mail address, full name, US Postal address, and
telephone number. We will bill you for any fees at that time, if any.
To withdraw your consent with City of Denton
To inform us that you no longer want to receive future notices and disclosures in electronic
format you may:
i. decline to sign a document from within your DocuSign account, and on the subsequent
page, select the check-box indicating you wish to withdraw your consent, or you may;
ii. send us an e-mail to purchasing@cityofdenton.com and in the body of such request you
must state your e-mail, full name, IS Postal Address, telephone number, and account
number. We do not need any other information from you to withdraw consent.. The
consequences of your withdrawing consent for online documents will be that transactions
may take a longer time to process..
Required hardware and software
Operating Systems: Windows2000? or WindowsXP?
Browsers (for SENDERS): Internet Explorer 6.0? or above
Browsers (for SIGNERS): Internet Explorer 6.0?, Mozilla FireFox 1.0,
NetScape 7.2 (or above)
Email: Access to a valid email account
Screen Resolution: 800 x 600 minimum
Enabled Security Settings:
Allow per session cookies
Users accessing the internet behind a Proxy
Server must enable HTTP 1.1 settings via
proxy connection
** These minimum requirements are subject to change. If these requirements change, we will
provide you with an email message at the email address we have on file for you at that time
providing you with the revised hardware and software requirements, at which time you will
have the right to withdraw your consent.
Acknowledging your access and consent to receive materials electronically
To confirm to us that you can access this information electronically, which will be similar to
other electronic notices and disclosures that we will provide to you, please verify that you
were able to read this electronic disclosure and that you also were able to print on paper or
electronically save this page for your future reference and access or that you were able to
e-mail this disclosure and consent to an address where you will be able to print on paper or
save it for your future reference and access. Further, if you consent to receiving notices and
disclosures exclusively in electronic format on the terms and conditions described above,
please let us know by clicking the 'I agree' button below.
By checking the 'I Agree' box, I confirm that:
I can access and read this Electronic CONSENT TO ELECTRONIC RECEIPT OF
ELECTRONIC RECORD AND SIGNATURE DISCLOSURES document; and
I can print on paper the disclosure or save or send the disclosure to a place where I can
print it, for future reference and access; and
Until or unless I notify City of Denton as described above, I consent to receive from
exclusively through electronic means all notices, disclosures, authorizations,
acknowledgements, and other documents that are required to be provided or made
available to me by City of Denton during the course of my relationship with you.